699074
92
Zoom out
Zoom in
Previous page
1/102
Next page
90 Programming SATEL
event assignment (if STATION 1 AND 2 is selected),
advanced options if SIA reporting format is selected.
4. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:
assign identifiers to the partitions, zones, keypads and expansion modules,
program the codes for events which are to be reported.
5. Define the parameters of test transmissions.
6. Define the priority of GPRS reporting in the settings of INT-GSM module (INT-GSM
module connected to the control panel) or ETHM-1 Plus module (INT-GSM module
connected to the ETHM-1 Plus module).
Reporting by using the GSM module
As an external modem, the following module must be connected to the control panel
(the RS-232 ports of control panel and module must be connected):
GSM-X,
GSM LT-2 with firmware 2.11 (or later),
GSM-4 with firmware 4.11 (or later),
GSM-5.
If the GSM module is only connected to the control panel dialer terminals (TIP and
RING), the GPRS reporting settings will be ignored.
The EXTERNAL MODEM and MODEM ISDN/GSM/ETHM options must be enabled in the
control panel (see: Telephone optionsp. 68).
1. Enable the REPORTING GPRS option.
2. Determine whether the event codes will be sent to both monitoring stations or to one of
them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2).
3. Program the following for the monitoring station to which event codes are to be sent:
reporting format in which the codes will be sent,
server address,
port number,
IP format in which the codes will be sent (SATEL or SIA-IP),
encryption key (STATION KEY) and control panel identifier for the purposes of GPRS
reporting (GPRS KEY) if the SATEL format is selected,
additional parameters if the SIA-IP format is selected,
identifiers with which the events will be sent,
event assignment (if STATION 1 AND 2 is selected),
advanced options if SIA reporting format is selected.
4. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:
assign identifiers to the partitions, zones, keypads and expansion modules,
program the codes for events which are to be reported.
5. Define the parameters of test transmissions.
10.2.4 SMS reporting
The TELIM format events cannot be sent as SMS messages.
1. Enable the REPORTING ETHM/INT-GSM option.
2. Determine whether the event codes will be sent to both monitoring stations or to one of
them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2).
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 Plus in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64 Plus

Satel Integra 64 Plus User Manual - English - 51 pages

Satel Integra 64 Plus Installation Guide - English - 35 pages

Satel Integra 64 Plus User Manual - German - 55 pages

Satel Integra 64 Plus Additional guide - German - 108 pages

Satel Integra 64 Plus Installation Guide - German - 36 pages

Satel Integra 64 Plus User Manual - Dutch - 53 pages

Satel Integra 64 Plus Additional guide - Dutch - 108 pages

Satel Integra 64 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info