699074
16
Zoom out
Zoom in
Previous page
1/35
Next page
14 Installer Manual SATEL
INTEGRA Plus
INT-KLCDS
INT-KLCDR
INT-KLCD
Fig. 3. Connection of keypads (other devices should be connected in a similar way).
The Table 1 shows the number of wires required for correct connection of the device to the
keypad bus if conductors with 0.5 mm diameter are used.
COM
CKM
DTM
Distance
Number of wires
up to 100 m 1 1 1 1
100-200 m 2 2 1 1
200-300 m 4 4 2 2
Table 1.
5.5.1 Addressing devices connected to the keypad bus
Each device to be connected to the keypad bus must have its own individual address from
the 0 to 7 range. Addresses must not repeat (the control panel does not support devices
having identical addresses). It is recommended that consecutive addresses be assigned
starting from 0.
In keypads, the address is set by software means. By default, address 0 is set. When started
with factory default settings, the control panel will support all keypads connected to the bus,
irrespective of what addresses are set in them. Thus it is possible to set correct individual
addresses in the keypads and perform identification of all devices connected to the bus.
In other devices to be connected to the keypad bus, the address is to be set using the
DIP-switches or the pins.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 Plus in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64 Plus

Satel Integra 64 Plus User Manual - English - 51 pages

Satel Integra 64 Plus Additional guide - English - 102 pages

Satel Integra 64 Plus User Manual - German - 55 pages

Satel Integra 64 Plus Additional guide - German - 108 pages

Satel Integra 64 Plus Installation Guide - German - 36 pages

Satel Integra 64 Plus User Manual - Dutch - 53 pages

Satel Integra 64 Plus Additional guide - Dutch - 108 pages

Satel Integra 64 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info