699078
43
Zoom out
Zoom in
Previous page
1/51
Next page
SATEL INTEGRA 41
3. When the and LEDs start blinking alternately, enter the new code and confirm it
with the
key.
7. Using the entry keypad
The INT-SCR multifunction keypad can work in the entry keypad mode (INT-ENT). The main
task of the zone keypad is activation of the delay for the 3. INTERIOR DELAYED type zones. The
time period during which these zones will act as delayed ones is programmable for the
keypad. If more than one zone keypads are assigned to the partition, a different delay
unblocking time can be programmed for each of them. After expiry of the programmed time,
the interior delayed zones will again operate as instant ones.
7.1 LED indicators
Only the LED
is used. Blinking of the LED indicates that the delay activation time
countdown is running (disarming has no effect on the LED blinking).
7.2 Sound signaling
The installer can disable the sound signaling or replace it by blinking of keypad
backlight.
During operation, the keypad can generate the following sounds:
1 short beep pressing any digit key, confirmation that code has been entered or card has
been read.
3 short beepsconfirmation of delay activation.
4 short and 1 long beeps confirmation of the guard round or execution of the control for
24. MONO SWITCH or 25. BI SWITCH type outputs.
3 pairs of short beepsthe user should change his/her code.
2 long beeps unknown code/card.
3 long beeps activation the delay is impossible (the partition is disarmed or the delay has
already been started) or the function is unavailable.
Additionally, the keypad can audibly signal the DELAY ACTIVATION TIME.
7.3 Functions available from the entry keypad
Depending on the user type and authority level, keypad settings and alarm system status,
entering the code and confirming it with the or key (presenting the proximity card) will
result in:
activating the delay in partition for 3. INTERIOR DELAYED type zones,
changing over the status of 25. BI SWITCH type outputs,
turning on the 24. MONO SWITCH type outputs,
guard round confirmation.
8. Using the code lock
The basic task of the code lock is to execute the access control function (supervise a single
door).
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 32 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 32

Satel Integra 32 Additional guide - English - 114 pages

Satel Integra 32 Installation Guide - English - 36 pages

Satel Integra 32 Quick start guide - German - 2 pages

Satel Integra 32 User Manual - German - 54 pages

Satel Integra 32 Additional guide - German - 121 pages

Satel Integra 32 Installation Guide - German - 38 pages

Satel Integra 32 Quick start guide - Dutch - 24 pages

Satel Integra 32 User Manual - Dutch - 52 pages

Satel Integra 32 Additional guide - Dutch - 121 pages

Satel Integra 32 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info