699078
37
Zoom out
Zoom in
Previous page
1/51
Next page
SATEL INTEGRA 35
weekly if the partition is to be armed / disarmed at different times on different days of
the week.
12. Press the
key
.
13. If you have selected the daily variant, the function will allow you at once to program the
arming time, and upon pressing the or key the disarming time. Upon confirmation
with the
key, you will be brought back to the list of options and functions.
14. If you have selected the weekly variant, you will be brought back to the list of options and
functions, where functions will appear to enable programming of the arming / disarming
time for each day of the week (in the same way as for daily timer).
Programming the value 99:99 means that the partition will not be armed / disarmed.
15. After the arming time has been programmed, an additional function will be displayed,
which allows you to define which arming mode will be activated by the given timer. By
default, the timer activates the full arming mode. If another arming mode is to be
activated, run this function (for the daily timer or individually for each day of the week)
and, using the and keys, select another arming mode. Confirm, using the
key.
16. Having programmed all parameters, press the
key.
17. When a prompt appears, asking you if the changes are to be saved, press the 1 key.
5.14 Zone testing
Within periodic inspections of the security alarm system, the detectors must be checked for
proper functioning. The zone testing function will allow you to do it without triggering the
reaction normally expected on violation, which is of particular importance in case of
permanently armed zones.
1. Enter the code and confirm with the
key
.
2. Using the key, scroll through the menu until you find the TESTS submenu.
3. Press the
key
.
4. Using the key, scroll through the menu until you find the ZONES TEST submenu.
5. Press the
key
.
6. When the NEW function is displayed, press the
key.
7. Select whether burglary zones or fire and technical zones, or single zone, will be tested,
and then press the
key.
8. Select the partitions in which zones will be tested (see: Selection from the multiple-choice
listp. 16).
9. Specify the test duration (maximum 50 minutes) and press the
key.
10. Define, whether violation of a zone is to trigger CHIME in the keypad (if yes, press any
numeric key the symbol will be displayed).
11. Press the
key
. The zone test will start.
Beginning of the zone test in any partition will start the test mode in all ABAX 2 / ABAX
system wireless devices which are used together with the control panel (the wireless
detectors will signal violations by means of LEDs).
If any detectors with remote LED ON/OFF function are connected to the control panel,
you can switch on the LEDs in them for the test duration (the installer can configure
the control panel so that this will take place automatically at the beginning of the test).
You can terminate the zone test before expiration of the programmed time, using the
FINISH TEST function (TESTS ZONE TEST FINISH TEST). Up to 6 seconds can elapse
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 32 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 32

Satel Integra 32 Additional guide - English - 114 pages

Satel Integra 32 Installation Guide - English - 36 pages

Satel Integra 32 Quick start guide - German - 2 pages

Satel Integra 32 User Manual - German - 54 pages

Satel Integra 32 Additional guide - German - 121 pages

Satel Integra 32 Installation Guide - German - 38 pages

Satel Integra 32 Quick start guide - Dutch - 24 pages

Satel Integra 32 User Manual - Dutch - 52 pages

Satel Integra 32 Additional guide - Dutch - 121 pages

Satel Integra 32 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info