699078
29
Zoom out
Zoom in
Previous page
1/51
Next page
SATEL INTEGRA 27
Zone isolation [Zones isolate]
Clock setting
Trouble state checking [Troubles view.]
Event log reviewing [Events viewing]
Detectors resetting [Zones resett.]
Options programming [Options chang.]
Access to menu TEST [Tests]
Downloading starting [Downloading]
Access to BI & MONO outputs [Outs control]
System state review in GUARDX [GUARDX using]
Resetting outputs [Clr.latch.outs]
Simple user having entered the code, confirmed with the key, the user never
selects the partitions which are to be armed / disarmed. All partitions the user has
access will be armed / disarmed.
Administrator the user has access to the menu functions which are reserved for the
administrator
Keypads etc. additional modules from which the user will be able to operate the system
(proximity card arm/disarm devices, partition keypads, code locks, reader expanders).
Proximity cards / DALLAS chips if the proximity card / DALLAS iButton reader is used in
the system, a proximity card / DALLAS iButton can be assigned to the user, which will
allow the user to operate the system by means of readers.
Keyfobs in case of the INTEGRA 128-WRL control panel or any other control panel to
which a module with keyfob support is connected (ACU-220, ACU-280, ACU-120,
ACU-270, ACU-100, ACU-250, INT-RX or INT-RX-S), a keyfob can be assigned to the
user, which will allow to operate the system remotely. The user may have up to 2 keyfobs:
the APT-200 (supported by the ABAX 2 / ABAX system) or the APT-100 (supported by the
ABAX system) and the 433 MHz (supported by the INT-RX or INT-RX-S modules).
Buttons the button functions are available, if a keyfob has been assigned to the user. It is
possible to assign a zone to a keyfob button or combination of buttons. The zone will be
violated upon pressing the button / combination of buttons. The assigned zone should not
exist physically.
Events (RX) / Events (ABAX) if a keyfob has been assigned to the user, it is possible to
define whether pressing the appropriate keyfob button will result in logging an event which
informs that the keyfob has been used.
ABAX confirmation if an ABAX 2 / ABAX system keyfob has been assigned to the user, it
is possible to determine the status of which outputs will be presented on the keyfob LEDs
on pressing any button.
Nameindividual user name.
5.8.1 User types
The name as used in the keypad is shown in the square brackets. The description includes
only the codes, but the information provided below applies to all identifiers assigned to the
user.
Normal basic type of user.
One-time [Single] the user will get one-time access.
Renewable [Time renewable] the user has access to the system for a defined period of
time. The user validity time should be defined. Before the validity time expires, the control
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 32 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 32

Satel Integra 32 Additional guide - English - 114 pages

Satel Integra 32 Installation Guide - English - 36 pages

Satel Integra 32 Quick start guide - German - 2 pages

Satel Integra 32 User Manual - German - 54 pages

Satel Integra 32 Additional guide - German - 121 pages

Satel Integra 32 Installation Guide - German - 38 pages

Satel Integra 32 Quick start guide - Dutch - 24 pages

Satel Integra 32 User Manual - Dutch - 52 pages

Satel Integra 32 Additional guide - Dutch - 121 pages

Satel Integra 32 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info