699031
86
Zoom out
Zoom in
Previous page
1/102
Next page
84 Programming SATEL
identifiers assigned to the alarm system,
list of event codes (not applicable to Contact ID and SIA formats).
10.1 Reporting parameters and options
See also section “Telephone options” p. 68.
Shown in square brackets are the names used in keypads.
10.1.1 Options
Station 1 or Station 2 the control panel will make an attempt to send the event code to
station 1 and, if unsuccessful, to station 2.
Station 1 onlythe event codes are only sent to station 1.
Station 2 only the event codes are only sent to station 2.
Station 1 and 2 the event codes are sent to both stations. For most formats, it is possible
then to define which events will be sent to the given station (see: EVENTS ASSIGNMENT).
Dual path reporting the option is available when the ETHM-1 Plus module with the
INT-GSM module attached to it is connected to the control panel. The control panel will
make an attempt to send the event code to station 1 and, if unsuccessful, to station 2.
The dual path reporting requires that the following settings be additionally
programmed:
just one transmission path for Station 1: ETHM (Ethernet) [settings of the ETHM-1
Plus module with the INT-GSM module connected to it],
priority transmission path for Station 2: GPRS SIM1 or GPRS SIM 2 [settings of the
ETHM-1 Plus module with the INT-GSM module connected to it],
IP format for both stations: SIA-IP,
supervision of the link between the control panel and the central station:
SUPERVISION INTERVAL parameter configured at least for the first monitoring station.
No module restart reports [No rest. mon.] when this option is enabled and the Contact ID
or SIA format is used for reporting, no event codes referring to module restarts will be sent
to the monitoring station.
Advanced
Long kiss-off signal with this option enabled, the control panel will accept a long kiss-off
(acknowledgment) signal for receiving events in case of Ademco Express and Contact ID
formats. Enable this option in the event of telephone reporting if the monitoring station
acknowledges receiving events in a non-standard way (the kiss-off signal is longer than
800 ms).
Longer waiting for initial handshake with this option enabled, the control panel will wait
longer for handshake from the monitoring station in case of sending events in the Ademco
Express, Contact ID or SIA format. Enable this option in the event of telephone reporting, if
the monitoring station sends a non-standard initial handshake.
Identifier confirmation required the option refers to the SIA format. If it is enabled, the
control panel waits for acknowledgement by the monitoring station of receiving the
identifier with which the data were sent. The option refers to the telephone reporting.
6-character identifier the option refers to the SIA format. If it is enabled, events will be
sent with a 6-character identifier. It consists of 2 parts: 2-character prefix and 4-character
identifier.
Send event source name the option refers to the SIA format. If it is enabled, the name of
event source (zone, user, etc.) will also be sent along with the event code.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 256 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 256 Plus in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 256 Plus

Satel Integra 256 Plus User Manual - English - 51 pages

Satel Integra 256 Plus Installation Guide - English - 35 pages

Satel Integra 256 Plus User Manual - German - 55 pages

Satel Integra 256 Plus Additional guide - German - 108 pages

Satel Integra 256 Plus Installation Guide - German - 36 pages

Satel Integra 256 Plus Quick start guide - Dutch - 2 pages

Satel Integra 256 Plus Additional guide - Dutch - 108 pages

Satel Integra 256 Plus User Manual - Dutch - 53 pages

Satel Integra 256 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info