699031
27
Zoom out
Zoom in
Previous page
1/102
Next page
SATEL INTEGRA Plus 25
Wait aft.disc.
Runtime
No autorst.3t.
Tamper in part.
2.6 Entering data by means of the keypad
Data are saved to the control panel if you press the key (in some keypads, the key is
also available, whose function is exactly the same). The key enables exiting the function
without saving any changes.
Described below are general rules for entering data, however they may be different as
regards some functions.
2.6.1 Selection from the single-choice list
The upper line of display shows the function name, and the lower one the currently
selected item. To scroll through the item list, use the keys (down) and the keys (up).
The and keys are not used.
2.6.2 Selection from the multiple-choice list
The functions that allow you to make multiple choice can be identified by an additional
symbol situated at the right-hand side of the display:
displayed item is selected / option is enabled,
displayed item is not selected / option is disabled.
Pressing any digit key (for some functions, this does not work with the key 0) will change the
currently displayed symbol to the other one. To scroll through the list of items, use the key
(down) or the key (up). For some functions, pressing the key 0 will allow you to enter the
number of item to be edited (e.g. the number of partition or zone). This will speed up search.
For some functions, pressing the or key will switch the keypad into the graphic
programming mode. The and symbols are used to present on the display the current
status of up to 32 items available in the given function (these can be e.g. zones, outputs,
timers, etc.). The key moves the cursor to the right, and the key to the left. If the list of
items is longer than 32, pressing the key when the cursor is placed over the last item will
display the next list, and pressing the key when the cursor is placed over the first item will
display the previous list. Pressing the key 0, 1 or 2 three times in the graphic mode within 3
seconds will have the following effect:
000 - the symbol will be displayed at all available items,
111 - the symbol will be displayed at all available items,
222 - reversal of the selection made: the symbol will be displayed at all items where
the symbol was displayed, and the symbol where the symbol was displayed.
On pressing the or key, the keypad will return to the text mode.
2.6.3 Entering decimal and hexadecimal values
Digits are entered by pressing the suitable keys. Characters from A to F are available under
the keys with numbers 2 and 3. Keep pressing the keys until the required character appears.
2.6.4 Programming telephone numbers
Keep pressing particular keys until the required character appears. Characters available in
the keypad are presented in Table 1. Up to 16 characters can be programmed. Some of the
special characters (a, b, c, d, # and ) are coded so that the character takes up two items,
hence the maximum number of characters available for entering, if they are used, will be
lower.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 256 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 256 Plus in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 256 Plus

Satel Integra 256 Plus User Manual - English - 51 pages

Satel Integra 256 Plus Installation Guide - English - 35 pages

Satel Integra 256 Plus User Manual - German - 55 pages

Satel Integra 256 Plus Additional guide - German - 108 pages

Satel Integra 256 Plus Installation Guide - German - 36 pages

Satel Integra 256 Plus Quick start guide - Dutch - 2 pages

Satel Integra 256 Plus Additional guide - Dutch - 108 pages

Satel Integra 256 Plus User Manual - Dutch - 53 pages

Satel Integra 256 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info