699031
28
Zoom out
Zoom in
Previous page
1/35
Next page
26 Installer Manual SATEL
156 43 15 4 3 2
Fig. 15. Connection of the RS-232 ports of control panel and external modem with the PIN5
socket (the SATEL made ETHM-1 / ETHM-1 Plus and GSM modules are connected in a
similar way). Shown on the left is RJ plug to be connected into the control panel mainboard
socket. Shown on the right is PIN5 plug. A ready cable is offered by SATEL company
(RJ/PIN5).
5.14.1 Configuring settings of the modem to be connected to control panel
The MDM56 and MDM56 BO modems, manufactured by SATEL, do not require any
configuration. The factory settings ensure correct work with the control panel.
Before connecting to the control panel, connect the modem to the computer and, using the
Terminal type program, set the correct operating mode.
1. Enter the at command the modem should respond with OK. Otherwise, enter ate1.
If the modem fails to respond, check the modem connection to the computer, and make
sure that the correct COM port is selected in the Terminal program settings.
2. Enter the at&v command. The modem will present a list of parameters to be
programmed (see example in Fig. 16). The parameter block saved as the profile 0(in
Fig. 16 STORED PROFILE 0) should include E1 Q0 V1 X4 &D2 &S0 and S00:000. In
such a case the modem is ready for operation with the control panel.
3. If any parameter is set differently, it should be modified. The parameter setting command
consists of a fixed AT prefix and the desired parameter setting (e.g., if E0 V0 is included in
the profile, the command for setting the proper value will be ate1v1, after which the
modem will answer OK).
4. Enter the at&w0 command to save the settings in the profile 0”.
5. Enter the atz command followed by at&v to check that all parameters are saved
correctly. The settings in ACTIVE PROFILE should be the same as in STORED PROFILE
0 (Note: Often the STORED PROFILE contains less parameters than the ACTIVE
PROFILE, which is normal).
To set the S0 modem register, use the ats0=0 command (in Fig. 16, the modem
register setting is shown in a slightly different notation S00: 000).
When restarting the modem, the control panel gives the ATZ command, which sets the
parameters as stored in the profile 0. For this reason, the current setting of the
parameters mentioned in it. 2 (ACTIVE PROFILE”) is irrelevant, but it is important that
they be set properly in the profile 0”.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 256 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 256 Plus in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 256 Plus

Satel Integra 256 Plus User Manual - English - 51 pages

Satel Integra 256 Plus Additional guide - English - 102 pages

Satel Integra 256 Plus User Manual - German - 55 pages

Satel Integra 256 Plus Additional guide - German - 108 pages

Satel Integra 256 Plus Installation Guide - German - 36 pages

Satel Integra 256 Plus Quick start guide - Dutch - 2 pages

Satel Integra 256 Plus Additional guide - Dutch - 108 pages

Satel Integra 256 Plus User Manual - Dutch - 53 pages

Satel Integra 256 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info