699031
21
Zoom out
Zoom in
Previous page
1/35
Next page
SATEL INTEGRA Plus 19
NC
Z
COM
A
NO
Z
COM
A
EOL/NC
R
Z
COM
A
EOL/NO
R
Z
COM
A
2EOL/NC
R1
R2
Z
COM
A
T
2EOL/NO
R1
R2
Z
COM
A
T
3EOL/NC
R1
R2
Z
COM
A
T
R3
M
3EOL/NO
R1
R2
Z
COM
A
T
R3
M
Fig. 8. The ways to connect detectors to zones. The detector outputs are designated with
letters: A - alarm, T tamper, M anti-masking. R=R1+R2.
5.7.1 End-of-line resistors
The value of R1, R2 and R3 EOL resistors is programmable within the range from 500 to
15 k (the sum of preset values may not exceed 15 k see PROGRAMMING manual). The
factory preset values are as follows:
R1 = 1.1 k,
R2 = 1.1 k,
R3 = 2.2 k.
According to the factory settings, in Single EOL configuration, the 2.2 k resistor is required,
and in Double EOL (2EOL) configuration two 1.1 k resistors.
If the resistor value in the keypad or expander is not programmable, in Single EOL
configuration, the 2.2 k
resistor is required, and in Double EOL (2EOL) configuration
two 1.1 k
resistors.
When programming the R3 resistor value, remember that it must differ from that of the
R2 resistor by at least 500
.
5.8 Connecting the sirens
If high-current output is not used, the 2.2 k
resistor should be connected between the
output and common terminals.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 256 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 256 Plus in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 256 Plus

Satel Integra 256 Plus User Manual - English - 51 pages

Satel Integra 256 Plus Additional guide - English - 102 pages

Satel Integra 256 Plus User Manual - German - 55 pages

Satel Integra 256 Plus Additional guide - German - 108 pages

Satel Integra 256 Plus Installation Guide - German - 36 pages

Satel Integra 256 Plus Quick start guide - Dutch - 2 pages

Satel Integra 256 Plus Additional guide - Dutch - 108 pages

Satel Integra 256 Plus User Manual - Dutch - 53 pages

Satel Integra 256 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info