699079
56
Zoom out
Zoom in
Previous page
1/114
Next page
54 Programming SATEL
2. DELAYEDa delayed-action zone with optional signaling of delay countdown in keypads.
3. INTERIOR DELAYEDthe zone operates as a delayed one when:
violation of another zone has triggered the entry delay countdown in the partition,
the delay will be activated using the INT-ENT entry keypad (see the INT-SCR
multifunction keypad manual),
arm mode type 2 or 3 is active and the DELAY IN 2&3 TYPE ARMING option is enabled for
the zone.
In other situations, the zone will act as an instant one.
4. PERIMETER instant zone, which is already armed during exit delay countdown.
5. INSTANTinstant zone.
6. EXITviolation of the zone during exit delay countdown is equivalent to the partition exit.
7. DAY/NIGHT if disarmed, the zone will signal violation acoustically in keypads and on
the 9. DAY ALARM, 12. SILENT ALARM and 116. INTERNAL SIREN outputs. When armed, the
zone acts as the 5. INSTANT zone.
8. EXTERIOR a zone with alarm verification: zone violation will start counting the surveillance
time if a second violation takes place during this time, an alarm will be triggered. If the
SURVEILLANCE TIME is not programmed (the value 0 is entered), the alarm will be generated
upon the first violation.
9. 24H TAMPER permanently armed zone, intended for the tamper circuits. The zone
violation will additionally cause a trouble condition.
10. 24H VIBRATION permanently armed zone, intended for working with vibration detectors.
If the partition includes the 10. 24H VIBRATION zone, starting the procedure of arming
from the LCD keypad will initiate a test of vibration detectors (the 39. TEST VIBRATION
DETECTORS output is activated and the countdown of time remained to the test end is
running).
11. 24H CASH MACHINEpermanently armed zone, intended for protection of a cash machine.
12. PANIC-AUDIBLE permanently armed zone, intended for operating the panic buttons.
13. PANIC-SILENTpermanently armed zone, intended for operating the panic buttons.
Violating the zone will trigger a silent alarm.
14. MEDICAL BUTTON
15. PERSONAL EMERGENCY
The zone types 14 and 15 trigger alarm signaled in the LCD keypads and on the 12. SILENT
ALARM
outputs. The names of zones and codes of events from these zones are consistent
with the Contact ID reporting format.
16...31 COUNTING C1...16 the counting zones will signal an alarm when the number of
violations counted during a specified time period exceeds the set value (see: Counters”
p. 59). Violations of the counting zones in armed mode can be signaled at the 9. DAY
ALARM, 12. SILENT ALARM and 116. INTERNAL SIREN outputs.
32. 24H FIRE
33. 24H FIRE SMOKE
34. 24H FIRE COMBUSTION
35. 24H FIRE WATER FLOW (FIRE)
36. 24H FIRE HEAT
37. 24H FIRE PULL STATION
38. 24H FIRE DUCT
39. 24H FIRE FLAME
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 24 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 24

Satel Integra 24 User Manual - English - 51 pages

Satel Integra 24 Installation Guide - English - 36 pages

Satel Integra 24 Quick start guide - German - 2 pages

Satel Integra 24 User Manual - German - 54 pages

Satel Integra 24 Additional guide - German - 121 pages

Satel Integra 24 Installation Guide - German - 38 pages

Satel Integra 24 Quick start guide - Dutch - 24 pages

Satel Integra 24 User Manual - Dutch - 52 pages

Satel Integra 24 Additional guide - Dutch - 121 pages

Satel Integra 24 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info