699073
27
Zoom out
Zoom in
Previous page
1/51
Next page
SATEL INTEGRA 25
Forced arming
If the arming procedure could not be started, the displayed message can allow of the forced
arming (1=Arm). On pressing the 1 key, the system will be armed despite a violated zone or
a trouble.
5.4.6 Failure of arming procedure
If the installer has enabled the GRADE 2 option, the arming procedure may end in failure. The
system will not be armed, if at the end of the exit delay countdown:
there is a violated zone in partition which was not violated when the arming procedure
was started,
there is a trouble which did not exist when the arming procedure was started.
5.4.7 Shortening the exit delay time
If such an option is permitted by the installer, the partition exit delay time may be shortened
upon pressing in turn the 9 and
keys. In order to shorten the exit delay time you should use
the same keypad which was used for arming.
5.5 Disarming and alarm clearing
Enter the code and confirm with the
key
(see: “[Code] arming / disarming menu p. 9).
If only selected partitions are to be disarmed (DISARM SELECTED function), the partitions
should be selected in the same way as when arming the selected partitions.
5.5.1 Alarm clearing without disarming
1. Enter the code and confirm with the
key
.
2. Using the key, scroll through the menu until the CLEAR ALARM function is found.
3. Press the
key
.
5.6 Two-code arming / disarming
If the partition is to be armed / disarmed with 2 codes, the user entering the first code must:
1. Enter the code and confirm with the
key
.
2. Scroll through the menu using the key until the ARM (2 CODES) / DISARM (2CODES)
function is found.
3. Press the
key
. Proceed in the same way as for the full arming of selected partitions
(steps 3-7).
4. If the installer has not set the code validity at 60 seconds, specify the code validity and
confirm with the key.
Prior to expiration of the code validity, the user entering the second code must arm / disarm
the partition using the:
LCD keypad (see: “Arming” or “Disarming and alarm clearing”),
partition keypad ([code] ),
reader (read-in of proximity card or DALLAS iButton).
The installer can configure the alarm system so that the second code will have to be
entered on another LCD keypad, partition keypad, etc.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128

Satel Integra 128 Additional guide - English - 114 pages

Satel Integra 128 Installation Guide - English - 36 pages

Satel Integra 128 User Manual - German - 54 pages

Satel Integra 128 Additional guide - German - 121 pages

Satel Integra 128 Installation Guide - German - 38 pages

Satel Integra 128 Quick start guide - Dutch - 24 pages

Satel Integra 128 User Manual - Dutch - 52 pages

Satel Integra 128 Additional guide - Dutch - 121 pages

Satel Integra 128 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info