699073
21
Zoom out
Zoom in
Previous page
1/51
Next page
SATEL INTEGRA 19
Events the submenu contains functions which allow to view the events saved to the control
panel memory (see: “Viewing the event log p. 33).
The content of received SMS messages is also saved to the events log of the
INTEGRA 128-WRL control panel.
Reset zones running the function will result in a temporary deactivation of the
43. RESETABLE POWER SUPPLY type outputs, thus making it possible to reset the alarm
memory for detectors supplied from those outputs (e.g. fire detectors).
Clear latched outputs allows to turn off some of the control panel outputs for which the
LATCH option is enabled, as well as the 9. DAY ALARM, 12. SILENT ALARM
and 116. INTERNAL SIREN type outputs.
Fin.f.door open restores the normal operating mode in all modules executing the access
control functions (in case of fire, the doors controlled by these modules may be
automatically unlocked).
Change options the following functions are available in the submenu:
Replace battery allows to disable the tamper protection in the selected wireless keypad
for 3 minutes. During this time you can open the keypad enclosure and replace the
battery. The function is available if a wireless keypad is installed in the alarm system.
The function is supported by ACU-120 / ACU-270 controller with firmware version 5.03
and ACU-220 / ACU-280 controller.
Keypad chime allows to turn on/off the CHIME in the keypad. The CHIME is five short
sounds by means of which the keypad will inform you e.g. that a door / window is open,
when the system is disarmed. The installer defines which zones of the alarm system
can trigger the CHIME.
Outputs chime allows to block the chime signal from selected partitions on the
11. CHIME type output.
Timers allows to program parameters of the timers, the editing of which is permitted by
the installer.
Partition timers allows to program the partition timers (see:Programming the partition
timer p. 34).
No expanders tamper alarms allows to temporarily disable the expansion module
tamper supervision. In case of any problems with the expansion modules, report the fact
to the installer.
Permanent service access the option is available to the master user (administrator). If
enabled, the installer has permanent access to the alarm system, which, among other
things, enables the control panel to be programmed by using LCD keypad or DLOADX
program.
Enabling PERMANENT SERVICE ACCESS option will clear the installer access time
programmed with the SERVICE ACCESS function. On the other hand, programming the
installer access time will disable the PERMANENT SERVICE ACCESS option.
Service can edit the option is available to the master user (administrator). If it is
enabled, the installer can add, edit and delete users in the administrator's object.
Service arm/disarm/clear/bypass the option is available to the master user
(administrator). If it is enabled, the installer can arm/disarm the system, clear alarms
and bypass zones in the administrator object.
Permanent DLOADX access the option is available to the master user (administrator).
If it is enabled, the control panel can be programmed by means of the DLOADX
program, irrespective of whether or not the installer has access to the alarm system.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128

Satel Integra 128 Additional guide - English - 114 pages

Satel Integra 128 Installation Guide - English - 36 pages

Satel Integra 128 User Manual - German - 54 pages

Satel Integra 128 Additional guide - German - 121 pages

Satel Integra 128 Installation Guide - German - 38 pages

Satel Integra 128 Quick start guide - Dutch - 24 pages

Satel Integra 128 User Manual - Dutch - 52 pages

Satel Integra 128 Additional guide - Dutch - 121 pages

Satel Integra 128 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info