699073
98
Zoom out
Zoom in
Previous page
1/114
Next page
96 Programming SATEL
formats. Enable this option in the event of telephone reporting if the monitoring station
acknowledges receiving events in a non-standard way (the kiss-off signal is longer than
800 ms).
Longer waiting for initial handshake with this option enabled, the control panel will wait
longer for handshake from the monitoring station in case of sending events in the Ademco
Express, Contact ID or SIA format. Enable this option in the event of telephone reporting, if
the monitoring station sends a non-standard initial handshake.
Identifier confirmation required the option refers to the SIA format. If it is enabled, the
control panel waits for acknowledgement by the monitoring station of receiving the
identifier with which the data were sent. The option refers to the telephone reporting.
6-character identifier the option refers to the SIA format. If it is enabled, events will be
sent with a 6-character identifier. It consists of 2 parts: 2-character prefix and 4-character
identifier.
Send event source name the option refers to the SIA format. If it is enabled, the name of
event source (zone, user, etc.) will also be sent along with the event code.
Send event partition name the option refers to the SIA format. If it is enabled, the name of
partition where the event occurred will also be sent along with the event code.
Each data block conf. required the option refers to the SIA format. If it is enabled, the
control panel waits for acknowledgement by the monitoring station of receiving each data
block. The option refers to the telephone reporting.
Extended charset the option refers to the SIA format. If it is enabled, not only ASCII
characters, but also national characters can be sent.
12.1.2 Monitoring station 1 / Monitoring station 2
Reporting format [Tel. 1 format] format in which event codes are sent to the monitoring
station.
Having selected the CONTACT ID (FULL) or SIA (FULL) format you do not need to
program the assignment of identifiers and any event codes. The control panel will send
the codes according to the format specification and the performed subdivision into
objects.
In the TELIM format, events can only be sent via the analog telephone line.
Telephone
Backup tel. no. [Tel. 2 number] a backup telephone number of the monitoring station. The
control panel will make an attempt of reporting to that telephone number, if the attempt of
reporting to the basic telephone number fails.
Backup format [Tel. 2 format] format in which event codes are sent to the backup
telephone number of the monitoring station.
Repetitions [Repetition count] the number of attempts to establish telephone connection
with the monitoring station after which, if there is no connection (busy number, no
answer from the station, etc.), the control panel will suspend reporting. Up to 31 retries
can be programmed. Programming the value 0 means that monitoring will be suspended
after 8 attempts.
Suspend time the time for which telephone reporting is suspended, after making the
programmed number of attempts to establish connection with the monitoring station. The
control panel will resume the attempt of establishing telephone connection with the
monitoring station after this time expires or a next, new event occurs. Up to 30 minutes
can be programmed. Programming the value 0 means that an attempt to establish
telephone connection with the monitoring station will only be taken after occurrence of a
new event in the system.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128

Satel Integra 128 User Manual - English - 51 pages

Satel Integra 128 Installation Guide - English - 36 pages

Satel Integra 128 User Manual - German - 54 pages

Satel Integra 128 Additional guide - German - 121 pages

Satel Integra 128 Installation Guide - German - 38 pages

Satel Integra 128 Quick start guide - Dutch - 24 pages

Satel Integra 128 User Manual - Dutch - 52 pages

Satel Integra 128 Additional guide - Dutch - 121 pages

Satel Integra 128 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info