699073
79
Zoom out
Zoom in
Previous page
1/114
Next page
SATEL INTEGRA 77
7. GSM phone only INTEGRA 128-WRL
You can program the GSM phone settings in the INTEGRA 128-WRL control panel:
using the keypad, in the service mode, by means of the functions available in the GSM
submenu (STRUCTURE HARDWARE GSM),
using the DLOADX program, in the Structurewindow, Hardwaretab, after clicking on
the GSM phone”.
7.1 GSM phone parameters and options
Shown in the square brackets are the names, as used in the keypads.
GSM phone [Use GSM phone] when the option is enabled, the control panel supports the
GSM communicator. The option may be disabled if the GSM communicator is not to be
used (e.g. SIM card is not installed, etc.). Disabling the option will thus prevent any GSM
related troubles from being unnecessarily reported.
PIN [PIN code] PIN code of the SIM card.
If the PIN code of SIM card is inconsistent with that entered in the control panel
settings, the control panel will inform of it by means of a suitable message and an
audible signal in the LCD keypad. After 255 seconds the control panel will retry to use
the PIN code. If the PIN code is wrong, the control panel will signal it again. After the
third attempt to use a wrong PIN code, the card will be blocked. In such a case, the
PUK code will have to be entered.
PUK code the parameter available in the keypad only (STRUCTURE HARDWARE GSM
PUK CODE), when as a result of entering invalid PIN code the SIM card has been
blocked. After entering a correct PUK code, confirmed by pressing the key, the SIM card
will by unblocked, receiving a new PIN code.
Modem format transmission standard suitable for the modem with which the GSM module
communicates.
SMS center no. telephone number of the short message service center. Entering the
number is necessary if the GSM communicator is to send SMS messages. The number
entered in the control panel must correspond to the network in which the GSM
communicator is used (this depends on the SIM card installed in the control panel).
GSM band selection of the frequency bands which are to be supported by the GSM phone.
The function is available for the electronics board version 2.1 or newer. If no band is
selected, the phone will support all bands.
GSM auto-restart after [Autorestart[h]] idle time of the GSM phone after which it is
restarted. To be defined in hours.
GPRS
GPRS APN access point name for Internet GPRS connection.
Username [User] user name for Internet GPRS connection.
Password [Passwd] – password for Internet GPRS connection.
DNS server IP address of DNS server to be used by the control panel. It is necessary for
GPRS communication, when the address of device to which the control panel is to connect
(computer with DLOADX or GUARDX program, monitoring station) has been entered in
the form of a name. If all addresses are entered in the form of an IP address (4 decimal
numbers, separated by dots), the DNS server address need not be programmed.
The GPRS parameters can be obtained from the GSM network operator.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128

Satel Integra 128 User Manual - English - 51 pages

Satel Integra 128 Installation Guide - English - 36 pages

Satel Integra 128 User Manual - German - 54 pages

Satel Integra 128 Additional guide - German - 121 pages

Satel Integra 128 Installation Guide - German - 38 pages

Satel Integra 128 Quick start guide - Dutch - 24 pages

Satel Integra 128 User Manual - Dutch - 52 pages

Satel Integra 128 Additional guide - Dutch - 121 pages

Satel Integra 128 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info