699073
50
Zoom out
Zoom in
Previous page
1/114
Next page
48 Programming SATEL
With temporary blocking [With time bypass] the partition can be armed/disarmed by the
user, but on arming the partition is blocked for a time indicated by the user or determined
by the installer (see DEFAULT BLOCK TIME option). When blocked, the partition can only be
disarmed by the user having the ACCESS TO TEMPORARY BLOCKED PARTITIONS right. An alarm
can end the blocking (see ALARM DISARM ALLOWED option).
Follow type AND [Dependent AND] the partition controlled by status of other partitions.
You should indicate the partitions whose status affects the dependent partition. The
dependent ANDtype of partition will be armed when all indicated partitions are armed
(start of the procedure of arming the last of the indicated partitions will initiate the
procedure of arming the dependent partition). The dependent ANDtype of partition will
be disarmed when any of the indicated partitions is disarmed. This type of partition is
recommended in case of shared corridors.
Follow type OR [Dependent OR] the partition controlled by status of other partitions.
You should indicate the partitions whose status affects the dependent partition. The
dependent OR type of partition will be armed when any of the indicated partitions is
armed (start of the procedure of arming any of the indicated partitions will initiate the
procedure of arming the dependent partition). The dependent ORtype of partition will be
disarmed when all indicated partitions are disarmed.
Access according to timer the partition can be armed/disarmed by the user, but only
within the time intervals set by the indicated timers. The number of timers depends on the
control panel.
Controlled by timer the partition, which is armed in time periods determined by selected
timers, but may also be controlled by the user code. The number of timers depends on the
control panel.
Bank vault the partition can be armed / disarmed by the user. Disarming may be delayed
by a defined period of time (see: DISARM DELAY). After it has been disarmed, the partition
can be automatically re-armed after a defined period of time elapses (see: TIME TO RE-
ARM).
Times
Partition exit delay the time counted from the start of the procedure of arming (by the
user, timer, zone, etc.), which allows to leave the protected area without triggering an
alarm.
Auto-arming delay [Auto-arm delay] the time counted before starting the procedure of
arming by timer. It allows the user to postpone or cancel the auto-arming.
Alarm verification time [Al. verify time] the time counted from the triggering alarm by
a zone included in alarm verification (with enabled PRE-ALARM or WITH VERIFICATION
option). If during the count another zone included in the alarm verification triggers an
alarm, a verified alarm will be triggered.
Guard round (on armed) every [Guard - armed] the maximum period of time that can
elapse since the last guard round when the partition is armed. If the time is exceeded,
information about the lack of guard round will be saved to the control panel memory.
Programming the value 0 will disable the control of guard round.
Guard round (on disarmed) every [Guard - disarm.] the maximum period of time that can
elapse since the last guard round when the partition is disarmed. If the time is exceeded,
information about the lack of guard round will be saved to the control panel memory.
Programming the value 0 will disable the control of guard round.
Blocked for guard round [Time for guard] the time counted from the moment of
registering the guard round, during which the partition is blocked.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128

Satel Integra 128 User Manual - English - 51 pages

Satel Integra 128 Installation Guide - English - 36 pages

Satel Integra 128 User Manual - German - 54 pages

Satel Integra 128 Additional guide - German - 121 pages

Satel Integra 128 Installation Guide - German - 38 pages

Satel Integra 128 Quick start guide - Dutch - 24 pages

Satel Integra 128 User Manual - Dutch - 52 pages

Satel Integra 128 Additional guide - Dutch - 121 pages

Satel Integra 128 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info