699062
30
Zoom out
Zoom in
Previous page
1/51
Next page
28 User Manual SATEL
panel will prompt the user to change the code. After the code has been changed, the
validity time will run from the beginning.
Temporary [Time not renew.] the user has access to the system for a defined period of
time. The user validity time should be defined. After the validity time expires, the user will
have no access to the system.
Duress code to be used in hold-up and duress situations. Use it to trigger a silent alarm
and send the event code to the monitoring station.
Mono” output operating [Mono outputs] code for control of the MONO SWITCH type
outputs.
Bi” output operating [Bi outputs] code for control of the BI SWITCH type outputs.
Blocking partition [Part.temp.block.] the code enables access to the armed partitions.
Using the code will block the armed partition(s) (the partition zones will not trigger the
burglary alarm). The blocking time is defined individually for each user within the range
from 1 to 109 minutes. If, however, the time of blocking for guard round is defined for the
partition and its duration is longer, the blocking will last longer.
Cash machine zones bypassing [Acces.to cash m.] the code to be used to unblock
access to the cash dispenser (the 24H CASH MACHINE type zones will be temporarily
bypassed in the partition).
Guard using this code means having made the round (additionally, it can result in the
partition being temporarily bypassed for the duration of guard round). The installer defines
the modules which are used to confirm making the round and determines the time interval
between successive rounds. If such a user is granted access to the partition, he/she will
have the same possibilities as the NORMAL type user.
Scheduled the user has access to the system as per the time schedule for a specified
period of time. It is necessary to select the schedule (the schedule is programmed by the
installer) and define the user validity period.
5.8.2 Adding new user
1. Enter the code and confirm with the
key
.
2. Press in turn the 2 and 1 keys. The list of functions to define the user parameters will be
displayed.
If the service code has been entered, before the list of functions is displayed, it is
necessary to specify the object in which the new user is to be created (the service
code enables access to all objects).
3. Using the appropriate functions, define the user's parameters.
At least one identifier, i.e. code, proximity card, DALLAS iButton or keyfob, must be
assigned to the user.
The new user may not be granted a higher authority level than the person who is
adding that user to the system.
4. Press the
key
.
5. When a prompt appears, asking you if the changes are to be saved, press the 1 key.
6. A message will inform you that a new user has been created. Press the
key to return to
the USER submenu.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel integra 128-WRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel integra 128-WRL in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel integra 128-WRL

Satel integra 128-WRL Additional guide - English - 114 pages

Satel integra 128-WRL Installation Guide - English - 37 pages

Satel integra 128-WRL Installation Guide - German - 2 pages

Satel integra 128-WRL Additional guide - German - 121 pages

Satel integra 128-WRL User Manual - German - 38 pages

Satel integra 128-WRL Additional guide - Dutch - 121 pages

Satel integra 128-WRL User Manual - Dutch - 52 pages

Satel integra 128-WRL Quick start guide - Dutch - 24 pages

Satel integra 128-WRL Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info