699072
89
Zoom out
Zoom in
Previous page
1/102
Next page
SATEL INTEGRA Plus 87
Identifiers
Each event code is sent to the monitoring station with an identifier. Up to 8 identifiers plus a
system identifier can be programmed. Sent with the system identifier are events related to
the alarm system (troubles, tests, etc.).
4 characters (digits or letters from A to F) must be programmed for each identifier. Using the
digit 0 in the identifier is not recommended.
For the pulse, ADEMCO EXPRESS, CONTACT ID (SELECTED) or SIA (SELECTED) formats, you must
define which events will be sent with the given identifier (see: Identifiers assignment).
For the CONTACT ID (FULL) or SIA (FULL) formats, each object has its own identifier.
Therefore, the identifiers of non-existing objects need not to be programmed. In the
system event identifier field, you should re-enter the identifier of the object which is
responsible for the system (for example, the object, where the control panel is
installed).
SIA / TELIM prefix
2 characters which will precede each of the identifiers in case of the SIA and TELIM formats.
Thus an identifier consisting of 6 characters can be obtained. 2 hexadecimal characters
(digits or letters from A to F) can be programmed. Entering 00 means that the prefix will not
be added. Using the digit 0 in the prefix is not recommended.
Events assignment
If the events are to be sent to both stations (STATION 1 AND 2 is selected), you can define
which event types will be reported to the given station.
It is not possible to assign events for the CONTACT ID (FULL) and SIA (FULL) formats.
10.1.3 SIA-IP
If events are to be sent in the SIA-IP format, you must program additional parameters for
each monitoring station.
Send MAC address [MAC] if this option is enabled, the MAC address of ETHM-1 /
ETHM-1 Plus module will be sent with event code.
Send timestamp [Timestamp] if this option is enabled, the date and time will be sent with
event code (the monitoring station can change the date and time in the control panel).
Encrypt data [Coded] if this option is enabled, the data to be sent will be encrypted, and
the date and time will be sent with event code (the monitoring station can change the date
and time in the control panel).
SIA-IP key the key to encrypt data to be sent using the SIA-IP format.
hex if the option is enabled, you can enter up to 32 hexadecimal characters as the SIA-IP
KEY
. If the option is disabled, you can enter up to 16 alphanumeric characters as the
SIA-IP KEY.
SIA-IP acct a string of up to 16 hexadecimal characters, which is used to identify the
control panel for the purpose of reporting in SIA-IP format.
Supervision interval [SIA-IP test] an additional transmission can be sent at specified
intervals to check communication with the monitoring station. You can program a number
of days, hours, minutes and seconds between the transmissions.
10.1.4 Identifiers assignment
Define the identifier with which events relating to individual partitions, zones, keypads and
expansion modules will be sent. If no identifier is assigned to the given element of the
system, it will be impossible to define codes for events relating to it.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 Plus in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128 Plus

Satel Integra 128 Plus User Manual - English - 51 pages

Satel Integra 128 Plus Installation Guide - English - 35 pages

Satel Integra 128 Plus User Manual - German - 55 pages

Satel Integra 128 Plus Additional guide - German - 108 pages

Satel Integra 128 Plus Installation Guide - German - 36 pages

Satel Integra 128 Plus User Manual - Dutch - 53 pages

Satel Integra 128 Plus Additional guide - Dutch - 108 pages

Satel Integra 128 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info