699072
74
Zoom out
Zoom in
Previous page
1/102
Next page
72 Programming SATEL
the following global options are disabled (cannot be enabled):
DO NOT ARM IF TAMPERED,
DO NOT ARM IF BATTERY TROUBLE,
REQUIRED SYSTEM RESET AFTER VERIFIED ALARM,
DO NOT ARM IF TROUBLE,
DO NOT ARM IF OUTPUTS TROUBLE,
DO NOT ARM IF REPORTING TROUBLE,
the TAMPER ALARM ALWAYS LOUD option is disabled for all zones, keypad and expander
buses (the option cannot be enabled),
the VALID WITHIN 30 SEC option is enabled for all partitions (cannot be disabled),
the entry delay time (global and for individual zones) can be up to 45 seconds (if longer,
it will be automatically reduced) for the 0. ENTRY/EXIT, 1. ENTRY, 2. DELAYED, 3. INTERIOR
DELAYED
, 85. ENTRY/EXIT CONDITIONAL, 86. ENTRY/EXIT FINAL, 94. ENTRY/EXIT
INTERIOR
and 95. ENTRY INTERIOR zone types,
the REPORTING DELAY option is enabled for the 4. PERIMETER, 5. INSTANT, 6. EXIT,
7. DAY/NIGHT and 64...79 BYPASSING GROUP: 1...16 zone types (the option cannot be
disabled),
the ABORT DELAY option is enabled for the 0. ENTRY/EXIT, 1. ENTRY, 2. DELAYED,
3. INTERIOR DELAYED, 85. ENTRY/EXIT CONDITIONAL, 86. ENTRY/EXIT FINAL,
94. ENTRY/EXIT INTERIOR and 95. ENTRY INTERIOR zone types (the option cannot be
disabled),
the PRIORITY option is enabled for the 9. 24H TAMPER zone type (the option cannot be
disabled),
the AUTO-RESET 3 and AUTO-RESET 1 options are disabled for the 12. PANIC AUDIBLE and
13. PANIC SILENT zone types (the options cannot be enabled),
AC loss report delay (for the control panel and all modules with power supply units) can
be up to 60 minutes (if longer, it will be automatically reduced),
AC loss report delay (for the control panel and all modules with power supply units)
cannot be equal to 0 (if the value 0 is entered, 1 minute will be programmed),
the quick arming is not possible (relevant parameters in keypads settings are
automatically modified),
the SHOW ARM MESSAGES option is enabled in all keypads (it cannot be disabled),
the following options are disabled in all keypads (they cannot be enabled):
SIGNALING TROUBLES IN PARTIALLY ARM,
SIGNAL NEW TROUBLE,
ALARM MESSAGES: PARTITIONS,
ALARM MESSAGES: ZONES,
SHOW VIOLATED ZONES,
DISPLAY MODE SWITCHING,
it is not possible to view the status of zones, partitions, alarms, trouble memory and
current troubles by pressing and holding down the dedicated keypad keys (the
corresponding options are disabled and cannot be enabled),
it is not possible to present information on partition status in the bottom line of keypad
display (relevant parameters in the keypad settings will be automatically modified),
after entering the user menu by means of the service code, you will get access in the
EVENTS submenu to the GRADE 3 function, which enables viewing the events required by
EN 50131 for Grade 3,
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 Plus in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128 Plus

Satel Integra 128 Plus User Manual - English - 51 pages

Satel Integra 128 Plus Installation Guide - English - 35 pages

Satel Integra 128 Plus User Manual - German - 55 pages

Satel Integra 128 Plus Additional guide - German - 108 pages

Satel Integra 128 Plus Installation Guide - German - 36 pages

Satel Integra 128 Plus User Manual - Dutch - 53 pages

Satel Integra 128 Plus Additional guide - Dutch - 108 pages

Satel Integra 128 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info