699072
11
Zoom out
Zoom in
Previous page
1/35
Next page
SATEL INTEGRA Plus 9
INT-ADR / CA-64 ADR. Addressable zone expander. Adds 48 addressable zones to the
security system. Control panels support the addressable zone expanders with firmware
version 1.5 (or later).
INT-O / INT-ORS / CA-64 O / CA-64 OPS. Output expander. Adds 8 programmable
hardwired outputs to the security system.
INT-PP / INT-IORS / CA-64 PP. Zone/output expander. Adds 8 programmable hardwired
zones and 8 programmable hardwired outputs to the security system.
ACU-220 / ACU-280. ABAX 2 wireless system controller. Enables the alarm system to
be operated using the ABAX 2 keyfobs and the ABAX 2 bidirectional wireless devices to
be used in the alarm system.
ACU-120 / ACU-270 / ACU-100 / ACU-250. ABAX wireless system controller. Enables the
alarm system to be operated using the ABAX 2 / ABAX keyfobs and the ABAX 2 / ABAX
bidirectional wireless devices to be used in the alarm system.
INT-VG. Voice module. Allows remote operation of the control panel from the telephone
keypad (interactive voice menu). It can store 16 voice messages for telephone
messaging.
INT-VMG. Voice message generator. Plays back prerecorded messages when specified
events occur in the system.
INT-AV. Audio alarm verification module. Enables remote audio alarm verification to
eliminate false alarms.
INT-KNX / INT-KNX-2. KNX integration module. Enables interfacing of the control panel
with the KNX system.
5. System installation
Disconnect power before making any electrical connections.
The following tools will be useful during installation:
blade screwdriver 2.5 mm,
Phillips screwdriver,
precision pliers,
flat nose pliers,
driller c/w a set of drill bits.
5.1 Installation plan
The installation must be preceded by preparation of a plan of the security alarm system. It is
advisable to draw up a sketch of the premises and mark on it all the devices that are to be
included in the alarm system: control panel, keypads, detectors, sirens, expansion modules
etc. The control panel and other alarm system components should be installed within the
protected area.
When writing data to FLASH memory and when the STARTER program is running
(control panel firmware is being updated), the expander outputs are deactivated. The
status of the control panel mainboard outputs remains unchanged. Keep that in mind
when designing the system. It is recommended that devices whose operation must not
be disturbed as a result of writing data to FLASH memory or after launching the
STARTER program be connected to the mainboard outputs.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 Plus in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128 Plus

Satel Integra 128 Plus User Manual - English - 51 pages

Satel Integra 128 Plus Additional guide - English - 102 pages

Satel Integra 128 Plus User Manual - German - 55 pages

Satel Integra 128 Plus Additional guide - German - 108 pages

Satel Integra 128 Plus Installation Guide - German - 36 pages

Satel Integra 128 Plus User Manual - Dutch - 53 pages

Satel Integra 128 Plus Additional guide - Dutch - 108 pages

Satel Integra 128 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info