699390
9
Zoom out
Zoom in
Previous page
1/24
Next page
SATEL INT-TSI 7
Static IP – if this option is enabled, you must program the keypad network settings (tap one
of the parameters below and, using the onscreen keyboard that will be displayed, enter the
data).
IP address – keypad IP address.
Mask – mask of the subnetwork in which the keypad is working.
Gateway – IP address of the network device through which the other devices in the
local network can communicate with devices in other networks.
DNS – IP address of the DNS server which is to be used by the keypad.
DHCP – if you enable this option, the keypad will automatically download the IP address,
subnet mask, gateway and DNS data from the DHCP server.
MAC – the unique hardware address of the keypad.
Details – this button is available if the “DHCP” option is enabled. Tap the button if you want
to check the keypad network settings.
Master – when this option is enabled, the keypad is working in the MASTER mode (it
communicates with the control panel directly through the keypad bus). The option is
enabled by default.
Enable – the button is available, if the “Master” option is enabled. Press to make
detection of the keypad possible by the keypad working in SLAVE mode. A window
will be displayed, showing the countdown of time remaining for detection of the
keypad. After the window is closed, detection of the keypad will be impossible again.
Slave – if this option is enabled, the keypad is working in SLAVE mode (it communicates with
the control panel via another keypad, which is working in the MASTER mode).
IP address of the master keypad – IP address of the keypad working in MASTER
mode by means of which communication with the control panel takes place. Tapping
a parameter will display a keyboard which can be used to edit the address.
Find – the button available when the “Slave” option is enabled. Press to find the keypad
working in MASTER mode by means of which communication with the control panel
is to take place (before that, press “Enable” on the keypad working in MASTER
mode).
The network settings may only be edited by the installer and administrators.
Only one keypad working in SLAVE mode can communicate with the control panel by
means of the keypad working in MASTER mode.
Information about keypad
The window displays the keypad name, its address in the alarm system, etc. In addition,
there is a function available that makes it possible to check if the keypad power supply is
appropriate.
Firmware
The window displays information on the keypad firmware.
Screen cleaning
The touch screen can be locked for 30 seconds so as to allow cleaning of the keypad. When
a dialog box appears, asking if you want to lock the screen, tap .
Remote access
The window shows the status of remote access function. Touch the keypad screen to enable
/ disable the function. When the function is enabled, you can save the configuration from the
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-SSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-SSW in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-SSW

Satel INT-TSI-SSW User Manual - English - 20 pages

Satel INT-TSI-SSW Installation Guide - English - 40 pages

Satel INT-TSI-SSW Installation Guide - German - 34 pages

Satel INT-TSI-SSW User Manual - Dutch - 20 pages

Satel INT-TSI-SSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info