699392
18
Zoom out
Zoom in
Previous page
1/20
Next page
16 INT-TSH SATEL
2.1.4 Denial of arming
The installer can program the control panel so that the arming procedure could not be
started, if:
a zone is violated in the partition;
there is a trouble in the system (including tamper);
there was a verified alarm.
In such a case the terminal will be displayed and a message specifying the cause of refusal.
Additionally, the message can prompt action which you can take:
“1=Ok” - on tapping the key, you will be brought back to the previous screen
(arming is impossible);
“1=Arm” - on tapping the key, the system will be armed despite the violated
zone or trouble (forced arming);
“2=Check” - on tapping the key, you will be able to view the list of violated /
bypassed zones or troubles. When viewing the list of violated / bypassed
zones, you can bypass / unbypass the currently displayed zone by tapping
the key.
2.1.5 Failure of arming procedure
The installer can program the control panel so that the arming procedure will fail if, when the
exit delay countdown ends:
there is a violated zone in the partition which was not violated when the arming
procedure was started;
there is a trouble which did not exist when the arming procedure was started.
2.2 Disarming
If there is an alarm (alarm memory), disarming will result in simultaneously clearing the
alarm.
Tap on the main screen. Depending on the system state:
I. There is no alarm (alarm memory) and 1 partition is armed / you have access to 1
partition
The partition will be disarmed.
II. There is an alarm (alarm memory) and 1 partition is armed / you have access to 1
partition
The “Alarm clearing / Disarming” screen will be displayed. Tap
. The partition will
be disarmed.
III. There is no alarm (alarm memory) and at least 2 partitions are armed
The selection screen will be displayed.
Tap if you want to disarm all partitions to which you have access from the keypad.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSH-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSH-BSB in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSH-BSB

Satel INT-TSH-BSB Quick start guide - English - 2 pages

Satel INT-TSH-BSB Installation Guide - English - 28 pages

Satel INT-TSH-BSB User Manual - English - 19 pages

Satel INT-TSH-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 20 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 28 pages

Satel INT-TSH-BSB User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info