699393
16
Zoom out
Zoom in
Previous page
1/20
Next page
14 INT-TSG SATEL
1 long beep – signaling of:
violated / bypassed zones when arming;
fault of the vibration detector (10. 24H VIBRATION type zone was not violated during the
vibration detector test run upon starting the arming procedure).
2 long beeps – incorrect code, function not available or exiting the function without
confirmation of the data entered (e.g. by using the
key).
3 long beeps – unavailable function.
1.3.3 Events signaled by sounds
Only installer selected events are signaled.
Alarms are being signaled throughout the time programmed by the installer.
5 short beeps – zone violation (CHIME).
Long beep every 3 seconds, followed by a series of short beeps for 10 seconds
and 1 long beep – countdown of exit delay (if the time is shorter than 10 seconds, only
the final sequence of short beeps will be generated).
A sequence of 7 beeps of diminishing duration, repeated every few seconds
countdown of auto-arming delay.
2 short beeps every seconds – countdown of entry delay.
2 short beeps every 3 seconds – signaling a new trouble.
Continuous beep – alarm.
Long beep every second – fire alarm.
2. Operating the alarm system
This section describes selected operations which can be executed using the icon-based
menu. The description does not include the user authorization, which will be required when
using the keypad.
The alarm system is operated from the terminal in the same way as when using the LCD
keypad with text menu. For description of the alarm system operation by means of LCD
keypad with text menu, please refer to the control panel user manual.
2.1 Arming
Completion of the steps below will start the arming procedure. The procedure ends when the
exit delay time elapses (if the countdown is completed successfully, the system becomes
armed – see also “Failure of arming procedure” p. 16). If the exit delay time is 0, the system
becomes armed instantly.
For further information on arming, arming modes, etc., please refer to the user manual for
INTEGRA or INTEGRA Plus control panels.
This section describes the operations which must be performed to arm the system in
the "full" mode. To arm the system in other mode you should proceed in much the
same way, except that instead of the icon for arming the system in the "full" mode you
should tap other icon.
The installer can prepare macro commands to simplify the arming procedure
(especially, for the system subdivided into many partitions).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB Installation Guide - English - 28 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info