699393
16
Zoom out
Zoom in
Previous page
1/18
Next page
14 INT-TSG SATEL
2 short beeps every 3 seconds – signaling a new trouble.
Short beep every 0.5 seconds – warning alarm.
Continuous beep – alarm.
Long beep every second – fire alarm.
2. Operating the alarm system
This section describes selected operations which can be executed using the icon-based
menu. The description does not include the user authorization, which will be required when
using the keypad.
The alarm system is operated from the terminal in the same way as when using the LCD
keypad with text menu. For description of the alarm system operation by means of LCD
keypad with text menu, please refer to the control panel user manual.
2.1 Arming
Completion of the steps below will start the arming procedure. The procedure ends when the
exit delay time elapses (if the countdown is completed successfully, the system becomes
armed – see also “Failure of arming procedure” p. 16). If the exit delay time is 0, the system
becomes armed instantly.
You can change the arming mode, which means you do not have to disarm the system to set
the partition to another arming mode. In the case of alarm, changing the arming mode or re-
activating the same arming mode will result in clearing the alarm (it does not apply to the
quick arming mode).
The day/night arming modes are available if the installer has defined which zones are
to be active in this armed mode.
If exit delay is programmed for a partition, you can leave the partition through the exit
route without triggering alarm after the partition arming procedure has started. The
exception is when the partition is armed without exit delay.
1. Tap on the main screen. The “Arming” screen will be displayed. Appearance of the
screen depends on whether you can arm the system in one or two partitions.
If the installer has allowed the quick arming (without entering the code) of one partition
only, arming the other partition is only possible after tapping and holding for
3 seconds.
2. If a screen is displayed presenting the partitions by means of appropriately described
fields, you can tap these fields to select whether the partition is to be armed ( ), or not
( ).
3. Tap one of the following icons:
- to arm in full mode,
- to arm in day mode,
- to arm in night mode.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB Installation Guide - English - 28 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info