699578
37
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 35
Restoring default settings, erasing codes
There are three ways to restore the factory settings:
1. Restore the settings after entering the service mode by means of the service code. Having
entered the service code, call function FS107 (restores all factory settings, except for user
codes) and function FS110 (restores the master user code, all the other user codes being
deleted). You can also perform function FS108 (to reset the event memory).
2. Restore the settings after entering the service mode „from pins” (if the service code has
been lost). Having entered the service mode „from pins” (see the Installer Manual), you
have to call Functions FS107 and FS110. You can also execute Function FS108. The
entering the service mode „from pins” alone will not restore any settings.
3. Restore the settings when the service mode „from pins” is blocked (FS131) and it is
impossible to enter it by using the service code. For description of the procedure refer to
the Installer Manual, section: Entering service mode „from pins”. After the procedure is
completed, the control panel will automatically restore the factory settings and start the
service mode. In order to restart the user codes, call FS110.
History Of Manual Updates
The changes described refer to the manual drawn up for the CA-6 v5.05 control panel.
D
ATE
V
ERSION
D
ESCRIPTION OF CHANGES
June
2007
6.06
Possibility of programming the special characters (
*
, #, a, b, c, d) in the telephone number
has been added (p. 7).
Arming is impossible, if the zone with activated PRIORITY option is violated or tampered
(p. 14).
Description of the zones sensitivity indication by the LED keypads has been added (p. 12).
A new parameter which enables to set a separate time of the test transmission when
system is armed (p. 25) and a new option „only 3 test transmission events” (FS 5, option
no. 5 of the first set, p. 8) have been added.
A new cable for programming the control panel from the computer is necessary (p. 31).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info