699607
15
Zoom out
Zoom in
Previous page
1/20
Next page
CA-5 SATEL 13
6. MONITORING
The monitoring codes can be transmitted to one or two telephone numbers. It is possible to
choose a different transmission format for each of them. Selecting the „Contact ID – all
codes” for the first number makes the choice of format for the other number irrelevant – CID
will be set automatically.
6.1 S
TATIONS
FS 52 – MONITORING STATION TELEPHONE FIRST NUMBER
|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|#
(hexadecimal) default |A|A|A|A|A|A|A|A|A|A|A|A|A|A|A|A|#
A=end of number C=tone dial E=short pause
B=pulse dial D=wait for continuous tone F=long pause
Program from the first space up to maximum 16 characters, end the number with the # key
– the panel will automatically fill out unused spaces with the A character.
FS 53 – MONITORING STATION TELEPHONE SECOND NUMBER
|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|#
(hexadecimal) default |A|A|A|A|A|A|A|A|A|A|A|A|A|A|A|A|#
FS 54, 55 – FORMAT OF DATA TRANSMISSION TO THE MONITORING STATION
FS 54
Telephone
1
FS 55
Telephone
2
Transmission
format
default 015 007
Program from 0 to 15
0. Silent Knight, Ademco slow (10 BPS)
1. Sescoa, Franklin, DCI, Vertex (20 BPS)
2. Silent Knight fast
3. Radionics 1400 Hz
4. Radionics 2300 Hz
5. Radionics with parity 1400 Hz
6. Radionics with parity 2300 Hz
7. Ademco Express (DTMF)
8. Silent Knight, Ademco slow, extended
9. Sescoa, Franklin, DCI, Vertex, extended
10. Silent Knight fast, extended
11. Radionics 1400 Hz, extended
12. Radionics 2300 Hz, extended
13. 0 no handshake (Silent Knight, Ademco 10BPS –
without confirmations)
14. Contact ID – selected codes
15. Contact ID – all codes
Note: The 14 format (Contact ID selected codes) is used to monitor those events, which
have any non-zero monitoring code programmed in the corresponding functions.
FS 56 – IDENTIFIER
|__|__|__|__|#
program from 0000 to FFFF default|0|0|0|0|#
(hexadecimal)
Notes:
The identifier 0000 blocks the monitoring feature,
Use the characters 1 to 9 and A to F. In case of three character identifiers, the fourth
character should be programmed as 0 (zero is not transmitted),
If the station requires zero in the identifier, program “A” instead of “0” (i.e. 12A3 instead of
1203)
.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 User Manual - English - 24 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info