699607
4
Zoom out
Zoom in
Previous page
1/20
Next page
2 Settings list CA-5
consecutive digits of the number programmed with the given function (the review procedure
is presented in the CA-5
U
SER
M
ANUAL
- description of the „Set time” function).
In order to change a parameter after beginning the review (readout) of the settings, bring to
an end the sequence of checking the settings (two long beeps after pressing the [
*
] key),
enter the new data and press [#]. Optionally, exit the function, call it again and enter the
changes.
After quitting the function, the control panel returns to the service mode. In order to exit the
service mode, call the function FS 0.
PROGRAMMING WITH LCD KEYPAD
Programming the system parameters is carried out in much the same way as for the LED
type keypad. When in the service mode [SERVICE CODE][#], the access to any of the
service functions included in the „CA-5
Settings List” is possible after entering the function
number and pressing the [#] key. The values of parameters being currently programmed are
shown directly on the display. It is possible to change the values of these parameters by
entering corresponding data from the keypad.
Select the option by calling the corresponding function to light up the character at the
option name. The character lights up on pressing any numeric key. Press any numeric key
again to extinguish the character (deactivate the option).
Another method of programming consists in moving around the service functions menu by
means of the [],[],[],[] arrow keys. The functions have been grouped so as to
facilitate search for the required parameters. The keypad indicates by suitable prompts which
parameter is currently being programmed.
[],[#] – go up the menu, call the displayed function,
[#] – confirm the change of function parameters,
[],[
*
] – return to the previous level of menu, quit the function without saving the changes,
[],[] – scroll the menu within the current level.
When entering the hexadecimal code values in LCD keypads, press the [] key to make
possible input of the A, B, C, D, E, F characters, which is indicated by appearance of the
*
mark at the right upper corner of the display. When entering the telephone numbers, the A
(end of number) character is unavailable – it is added automatically. In order to enter the
event codes for monitoring purposes, the A, B, C, D, E, F characters can be input upon
pressing the [] or [] key.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 User Manual - English - 24 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info