699607
21
Zoom out
Zoom in
Previous page
1/27
Next page
CA-5 SATEL
19
5.1 DLOAD10
PROGRAM
Delivered together with the control panel, the DLOAD10 program is designed for
programming the control panels: CA-5, CA-6 and CA-10, as well as the remote control sets
RX2K and RX4K, RE-4K, GSM-4 and GSM LT-1 communication modules and ACU-100
wireless system controller from a computer. Furthermore, the program makes possible
creation of documentation for the security systems, sets of settings for various configurations
("patterns" which facilitate programming new systems), sets of events for each system, as
well as remote control of the control panel, identical as by means of the keypads.
The program is designed for IBM PC/AT compatible computers. It works in any computer
hardware configuration in the WINDOWS (9x/ME/2000/XP) environment. It is recommended
that the program be installed on the computer hard drive.
The control panel communicates with the computer via the RS-232 (TTL) port or a telephone
line. For the telephone communication with the panel, the program uses a modem controlled
by one of the COM ports (external or internal), compatible with the HAYES “AT Command”
standard. Communication with the CA-5 control panel is possible in the BELL 103 standard
(at rate of 300 Bps). As the control panel only transmits data at a speed of 300 bauds, the
modem must support this rate of transmission.
Usually, a suitable configuration of the modem is necessary i.e. disabling the function
of transmission standard negotiation and forcing operation with the rate of
transmission of 300 Bps.
The program installation consists in running the setup.exe program from a CD-ROM
delivered with the control panel. After installation, the program should be launched. Access to
the program is protected with an access code. After installation of the program, the access
code is: 1234 and can be changed in any string of 16 alphanumeric characters. As long as
the code has its factory form, pressing the “ENTER” key (without entering any code) will start
the program with the default access code (1234).
Having started the program, perform the configuration and initialize the RS-232 port, or the
modem, by means of which the control panel will be programmed. The further step can be
selection of the control panel type CA-5 and starting of connection (remote or local).
To facilitate using the program and programming the control panel parameters itself, a HELP
system is provided. The system is accessible from the “HELPmenu or, after pressing the F1
key, from the computer keyboard. In order to get an immediate access to more detailed
information, it is necessary to select the desired element in the program window (by moving
the mouse pointer onto it and clicking the left mouse button), and then press the F1 key.
5.1.1 P
ROGRAM CONFIGURATION TO ESTABLISH COMMUNICATION WITH THE
CONTROL
PANEL
In order to start configuration, click on the icon – the „Configuration” window will be
opened. The "Port RS-232" tab enables the port number to be selected during direct
programming through the RS port of the control panel. If the control panel is to be
programmed by means of the modem, select the „Modem” tab and click on the „Details
button.
Having opened the „Modem window, select the corresponding modem type from the list
or click on the „! Change” button and enter the data according to the documentation of
your modem. Clicking on this button will also allow you to change the communication port
number or the rate of transmission.
The „9Test” button permits checking the modem operation with the program – it opens
a window containing information on the modem initialization.
After correct initialization of the operation, close the configuration windows.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 User Manual - English - 24 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info