699583
9
Zoom out
Zoom in
Previous page
1/27
Next page
CA-5 SATEL
7
1. Enter the control panel service mode.
2. Call in the FS 76 function and delete all the monitoring codes.
3. Using the FS 52 & FS 53 functions, program the telephone numbers to which the audible
information on events is to be sent. If the first number is busy, the control panel will dial the
second number.
4. Select the „0 no handshake” data transmission format in the FS 54 & FS 55 functions
(„13: Ademco Slow without confirmations”).
5. By means of the FS 56 function, set any four-character control panel identifier, e.g. 1111.
6. Assign codes to the events which are to be reported by the control panel, e.g. using the
FS 57 function program the zone alarm codes.
7. Enable monitoring – FS 10 Option 1.
3.7 R
EMOTE PROGRAMMING
DOWNLOADING
In order to facilitate its programming, the CA-5 control panel has been equipped with
a DOWNLOADING feature, which enables a computer to be used for programming and
control of the security system. The programming may be effected directly through the control
panel RS-232 port (with TTL standard signals) or by means of a modem through the
telephone line terminals TIP and RING.
3.7.1 M
ODEM
Interfacing with the computer by means of the modem can be performed in two ways:
either in the remote mode (by means of the telephone cable network), or in the local mode.
In both cases the computer must be equipped with a modem.
The local mode of programming can be entered by connecting the modem directly to the
properly polarized TIP and RING telephone terminals of the control panel (see Figure 3).
The telephone line must be disconnected from the control panel.
Note: Some modems require a capacitor (of at least 1 µF) to be connected in the circuit to
separate the constant voltage polarizing the control panel telephone input.
Having initialized the modem in the DLOAD10 program (see section STARTING THE
CONTROL PANEL) and having selected from the Communication menu the ÆModem
command, and then the ÆLocal connection with… command, activate the FS 77 service
function in the control panel. When the communication is established, download the
control panel data and then proceed to download the events, program parameters, etc.
The remote mode of programming can be reached by establishing the telephone
connection between the service computer and the control panel. Initialization of the
communication through the telephone line is possible in three modes:
Figure 3. Polarization of telephone line terminals in order to activate local communication
with the computer.
Resistor 220
To modem
(AUX=+12 V)
+ OUT1- OUT2 OUT3 AUX KPD DTA CLK COM Z1 Z2 COM Z3 Z4 COM Z5 TIP RING T-1 R-1
AC AC
18V
CA-5 CONTROL PANEL
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 Plus in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5 Plus

Satel CA-5 Plus Additional guide - English - 20 pages

Satel CA-5 Plus User Manual - English - 24 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Additional guide - German - 20 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Installation Guide - German - 28 pages

Satel CA-5 Plus User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info