699577
19
Zoom out
Zoom in
Previous page
1/24
Next page
CA-10 SATEL
17
confirmation, if the selected user is to be deleted. If not, press the [
*
] key, if yes, press
the [#] key. The numbers of users from 10 to 12 can be entered by pressing two keys,
first the key of tens [
*
], then the key of units (from 0 to 2).
In the LCD keypad, the user indicated by the cursor (flashing field) will be deleted. On
pressing and holding down the or key the name of the user indicated with the
cursor appears. The cursor can be positioned with ◄►.
The function is only available to the master user.
Example: deleting the third user’s access code (master code = 1234)
[1234] [
*
] - activating the „user function” mode by the master user,
[3] - calling the „delete code” function, the zone LEDs indicate the partition
users' numbers.
[3] - selecting the code to delete; the LED of the chosen code starts blinking
[#] - selected user code deletion; four short and one longer beeps signal the end
of the function.
Zone bypass [CODE][
*
][4]
This function makes it possible to bypass zones in order to partially arm the alarm
system or to bypass malfunctioning detectors. Only disarmed zones can be bypassed.
In the LED keypad, bypassing a zone consists in entering the number of the LED on
which the given zone is indicated. Only the zones belonging to the keypad served
partition can be bypassed. The zones 1-12 can only be bypassed when they are
indicated on the keypad LEDs. The installer decides about which zones should be
indicated. The zones 13-16 can be bypassed by entering the zone number even when
they are not indicated on the LEDs. When the bypass function is in use, the LED
keypad indicates the state of max. 12 zones. With the zones bypassed, the
corresponding LEDs are blinking. Enter the numbers of LEDs / zones from 10 to 16 by
pressing two keys, first the key of tens [
*
], then the key of units (from 0 to 6). Confirm
the choice by pressing [#]. The zones will remain bypassed until next disarming or until
they are unbypassed.
When the function is active, on entering a zone number, the panel will signal bypassing
the zone with two beeps, and enabling the zone with one beep. Two long beeps mean
that the zone belongs to another partition, or it is armed and its bypassing is not
possible.
In the LCD keypad key changes the status of the zone (bypassed - unbypassed)
indicated by the cursor. Pressing key displays the zone name. The cursor can be
positioned with keys. It is possible to choose a zone by giving its number with the
numeric keys of the panel (for example: [
*
][3] will enable bypassing of zone 13).
The function is available only to the master user and the user with authority level 1.
Example: bypassing zones 3, 5 and 12 (master access code = 1234)
[1234] [
*
] - activating the „user function” mode by the master user,
[4] - calling the „Zone bypass” function,
[3][5] - selecting zones numbers 3 and 5; the panel will confirm the entry of each
number by with two short beeps,
[
*
][2] - selecting zone number 12; the panel will confirm the entry with two short
beeps,
[#] - confirmation of the data and quitting of the function programming.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info