699577
6
Zoom out
Zoom in
Previous page
1/11
Next page
4 CA-10 SATEL
bypass zones, etc.). The installer may allow several partitions being operated with a single
keypad. To switch the keypad over to handle another partition, press and hold down the key
corresponding to the number of that partition (1, 2, 3 or 4). For the LCD keypad which has
been switched over to handle another partition, it is possible to switch it over again to handle
still another one. For the LED keypad, you can only press and hold down the key to go
back to operate the partition the keypad is assigned to. Irrespective of the keypad type, you
will be automatically brought back to the partition to which the keypad is assigned after 15
seconds of idle time.
4. Partition arming
A partition can only be armed from the keypad assigned to the partition or switched over to
handle it (see: OPERATING SEVERAL PARTITIONS WITH A KEYPAD).
Prior to arming, make sure that there are no violated zones (e.g. open windows or doors),
which may prevent the system from arming (if the system has been so configured by the
installer).
After arming, the exit delay countdown may be running, which allows you to leave the
premises without triggering alarm (the zones will be armed only when the exit delay
countdown is finished).
If, during the exit delay countdown, the control panel will not register leaving the premises
(the zone monitoring the exit route will not be violated), the selected zones can be
automatically bypassed, thus enabling you to stay in the protected premises. The installer
shall define which zones are to be bypassed in such a case.
4.1 Full arming
Enter the code and confirm using # key.
Note: The user having the authority 7 can only activate partial armed mode (the installer
selected zones will be bypassed).
4.2 Quick arming
If your installer has enabled the Quick Arm feature, you will be able to arm the system without
using the code. To quickly arm the system, press in turn the 0# keys.
4.3 Arming in silent mode
During the silent armed mode, the alarms from zones are only signaled on the keypad
(however, the installer can program the control panel output so that it can provide information
about alarms being signaled on the keypad). After activating the silent armed mode, the
installer selected zones will be bypassed.
1. Enter the code and confirm using key.
2. Press the 5 key (to start the ARMING SILENT user function).
5. Disarming and alarm clearing
The partition can be disarmed and the alarm cleared only from the keypad assigned to that
partition or switched over to handle it (see: O
PERATING SEVERAL PARTITIONS WITH A KEYPAD).
Alarms triggered from the keypad can be cleared from any keypad.
In order to disarm the partition and clear the alarm, enter the code and confirm with the # key.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info