699888
2
Zoom out
Zoom in
Previous page
1/3
Next page
ASW-100 E / ASW-100 F ABAX
2
mode 1 - the button enables the electric circuit to be manually controlled – press the
button to close/open the 230V electric circuit (switch ON/OFF the device
connected to the controller socket).
mode 2 - the button enables the electric circuit to be manually controlled and the
remote control to be disabled – shortly press the button to close/open the
230V electric circuit (switch ON/OFF the device connected to the controller
socket). Press and hold down the button for 3 seconds to disable/enable the
remote control of the electric circuit (with remote control disabled, the LED
indicator is blinking).
The two-color LED provides the following information:
steady green light – the 230V electric circuit is open (the device connected to the
controller socket is OFF)
steady red light – the 230V electric circuit is closed (the device connected to the
controller socket is ON)
blinking green light – remote control of the device is disabled, the 230V electric
circuit is open (the device connected to the controller socket is OFF)
blinking red light – remote control of the device is disabled, the 230V electric circuit
is closed (the device connected to the controller socket is ON)
In addition, the LED will change its color momentarily during the polling: if
lighting/blinking green, it will give a red flash; if lighting/blinking red, it will give a green
flash.
2. Description of the installation
The ASW-100 E and ASW-100 F 230V wireless controllers should be installed
indoors, in spaces with normal air humidity.
Before plugging the wireless controller into the 230V socket, familiarize
yourself thoroughly with the electrical system in the premises. The phase
conductor in the socket the controller is to be plugged in should be on the
left-hand side, and the neutral conductor – on the right-hand side.
To install the ASW-100 E or ASW-100 F controller in the ABAX system, proceed as
follows:
1. Add the controller to the wireless system (refer to the ACU-100 controller user
manual). Placed on the housing is a sticker with the 7-digit serial number which is
to be entered when registering the controller in the system.
2. Plug the controller into the selected 230V socket.
3. Check the level of signal received by the controller from the controller. If
necessary, select another socket and re-check the signal level.
4. Having selected the installation place which ensures the optimum signal level,
configure the controller as required. Refer to the ACU-100 user manual for
configuration related information.
3. Technical data
Working frequency band............................................................. 868.0MHz ÷ 868.6MHz
Range.....................................................................................up to 150m (in open area)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel ASW-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel ASW-100 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel ASW-100

Satel ASW-100 User Manual - German - 3 pages

Satel ASW-100 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info