699889
2
Zoom out
Zoom in
Previous page
1/4
Next page
2 APT-100 SATEL
the controller / control panel, the keyfob will give beeps. When the keyfob will receive system
status data, will display them on the LEDs.
2.1 Alarm system control
The five buttons allow you to start up to 6 functions (to start the sixth function, press
simultaneously the and buttons [1 and 5]).
Controlling the INTEGRA / INTEGRA Plus system
The keyfob controls zones. These zones should not exist physically and the programmed
wiring type must be different from NO DETECTOR and FOLLOW OUTPUT. Any zone type can be
programmed. Pressing a keyfob button (or two buttons simultaneously) will violate the zone
and trigger corresponding reaction of the control panel. The zone will remain violated as long
as the button is pressed, however not longer than 20 seconds.
Controlling the VERSA / VERSA Plus / VERSA IP system
For the list of functions that can be run using the keyfob, please refer to the manuals of
VERSA / VERSA Plus / VERSA IP control panels. If the keyfob is to control the zone, the
zone should not exist physically and the programmed wiring type must be different from NO
DETECTOR
.
2.2 System state information
To get the information on system state, press any button (the button does not have to start
any function). The information will be presented on keyfob LEDs by a few seconds.
Information about INTEGRA / INTEGRA Plus system state
The LEDs indicate the status of three outputs of the system. The LED is ON when:
output with normal polarity is active,
output with reversed polarity is inactive.
Information about VERSA / VERSA Plus / VERSA IP system state
For the list of information that can be presented on the keyfob LEDs, refer to the manuals of
VERSA / VERSA Plus / VERSA IP control panels.
3. Battery replacement
There is a danger of battery explosion when using a different battery than
recommended by the manufacturer, or handling the battery improperly.
Be particularly careful during installation and replacement of the battery. The
manufacturer is not liable for the consequences of incorrect installation of the
battery.
The used batteries must not be discarded, but should be disposed of in
accordance with the existing rules for environment protection.
The battery life depends on how the keyfob is used. The more frequently the buttons are
pressed, the faster the battery drains. When the battery is low, the backlight will be flashing
(instead of being steady on) after you press a button. The low keyfob battery will be signaled
as trouble by the control panel.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel APT-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel APT-100 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel APT-100

Satel APT-100 User Manual - German - 4 pages

Satel APT-100 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info