Manual Satel AOD-210 (page 6 of 13) (English)

699623

Zoom out

Zoom in

1/13

4 AOD-210 SATEL

In response to the battery voltage drop below 2.75 V, sensitivity of sensors in the

detector is automatically lowered to eliminate false alarms.

Electronics module

Do not remove the plastic cover from the circuit board to prevent damage to the

components located on the board.

Do not touch the pyroelectric sensor, so as not to soil it.

TMP terminals – tamper input (NC).

pins to enable/disable the tamper input. If

no additional tamper switch is connected

to the TMP terminals, jumper should be

placed across the pins.

CR123A lithium battery.

microwave sensor.

green LED.

red LED.

yellow LED.

dusk sensor.

PIR sensor (dual element pyrosensor).

tamper switch activated by cover

removal.

fixing screw holes.

On the other side of the electronic board is

a tamper switch activated by removing the

detector from the wall.

When mounting the detector on the angle or ball bracket, it is recommended to install

additional tamper switch.

3 Selecting a mounting location

 Install the detector at the recommended height (Fig. 3-I).

 If traffic nearby or objects moving out of the protected area cause an alarm, move the

detector slightly downwards or reduce the detector sensitivity (Fig. 3-II).

 Install the detector so that the expected movement of an intruder will be across the

coverage pattern (Fig. 3-III).

 Don’t install the detector closer than 3 meters from the moving objects (eg. tree branches,

bushes, laundry etc.) (Fig. 3-IV).

 Don’t direct the detector on reflective surfaces or on fans or a heat sources (Fig. 3-V).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Satel AOD-210 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel AOD-210

Satel AOD-210 User Manual - German - 13 pages

Satel AOD-210 User Manual - Dutch - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Satel AOD-210 Manual

Product: