699878
3
Zoom out
Zoom in
Previous page
1/4
Next page
SATEL AMD-102 3
Be particularly careful during installation and replacement of the battery. The
manufacturer is not liable for the consequences of incorrect installation of the
battery.
The used batteries must not be discarded, but should be disposed of in accordance
with the existing rules for environment protection.
The device is designed for indoor installation. The detector should be mounted on a fixed surface
(e.g. window or door frame), and the magnet on a movable surface (e.g. window or door).
Mounting the magnetic contact on ferromagnetic surfaces and/or near to strong magnetic and
electrical fields is not advisable, because it can result in malfunctioning of the device.
1. Open the detector enclosure (Fig. 2).
2. Install the battery and add the device to the wireless system (see the ABAX controller manual
or the INTEGRA 128-WRL / VERSA / VERSA Plus / VERSA IP control panel installer
manual). The sticker with serial number which shall be entered when registering the detector
in the system can be found on the electronics board.
3. Close the detector enclosure.
4. Fasten the detector temporarily at the place of its future installation.
5. Check the level of signal received from the detector by the ABAX controller or the
INTEGRA 128-WRL control panel. If the signal level is lower than 40%, select another place
for installation. Sometimes, it is sufficient to shift the device ten or twenty centimeters to
obtain a considerable improvement in the signal quality.
6. Open the detector enclosure (Fig. 2).
7. Make a hole in the enclosure base and run through it the wires for roller shutter detector
and/or NC type detector (the maximum permissible wire length is 3 meters).
8. Use screws to fix the enclosure base to the mounting surface (Fig. 4). Wall plugs (screw
anchors) and screws are included in the detector delivery set.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel AMD-102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel AMD-102 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel AMD-102

Satel AMD-102 User Manual - German - 4 pages

Satel AMD-102 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info