801541

Saro Felix 213-40011 Manual

16
Zoom out
Zoom in
Previous page
1/17
Next page
16 Stand 03/17 TM
ENGLISH
GENERAL INFORMATION STAINLESS STEEL ARTICLES / FURNITURE
INITIAL CLEANING OF STAINLESS STEEL ARTICLES / FURNITURE
From the Saro sortiment we can recommend the stainless steel cleaner R50 with the Saro order no.: 192-1000, in a 400 ml spray can
(with only pure air as propellant). R50 degreases, protects and shines in one operation.
Stainless steel is a collective term for stainless steels, for more or less complex alloys of iron and other metals.
Under the inuence of oxygen and air, these alloys form a thin protective layer on their surface, which is only a few
atomic layers thick. The so-called passive layer.
This passive layer can also be formed over and over again, provided that the surface is shiny and free of impurities.
However, a fallacy is that stainless steel cannot rust at all. In case of insucient protection or care, this is possible.
Initial cleaning is also important.
The surfaces may become soiled during manufacture, transport, storage and assembly.
(e. g.: Deposition of grinding dust, chips, welding spatter, soot or by abrasion of foreign material may lead to ash
rust).
This rusting of foreign material on the stainless steel surface leads to damage and penetration of the passive layer.
This local damage can then lead to pitting in the stainless steel.
That‘s why initial cleaning is so important, not only for hygienic reasons.
Please do not use the following cleaning agents under any circumstances:
Chlorine- or chloride-containing, with hydrochloric acid (in acidic cleaners), sulphuric acid or other aggressive
cleaning agents. These cause discoloration (black) of the stainless steel or damage the passive layer for
corrosion protection.
CAUTION
• Seasoning concentrates such as mustard, acetic or citric acid essences, saline solutions, seasoning tablets and
similar can also damage the stainless steel surface if they are not removed immediately.
• Scratches are caused by the use of scouring milk, scrapers, metal / pot sponges, steel wool and other hard
objects.
• During use, damage may be caused by other movable equipment made of hard material such as stainless steel
or similar, which may be pulled over the stainless steel surfaces, for example. Pay attention to this, too.
• Use a damp and warm cloth/sponge/eece for cleaning, also a microbre cloth without metal parts.
• Stubborn dirt can be removed by placing a damp cloth (also a kitchen roll) on this spot for 10 to 20 minutes to
facilitate cleaning.
• Any residual detergent must be removed by wiping with clear water. Then rub the surfaces dry with a soft
cloth/sponge.
• For rough cleaning, use a soft brush after pouring out the ash collector to remove stuck ash residues.
CLEANING OF STAINLESS STEEL ARTICLES
GENERAL NOTE MAINTENANCE OF STAINLESS STEEL ARTICLES / FURNITURE
• When using care products such as stainless steel cleaners, the surface is optimally protected.
• If necessary, ll the body with an 18-litre garbage bag.
• Clean the product regularly in compliance with the hygiene regulations.
• For rough cleaning, use a soft brush after pouring out the ash collector to remove stuck ash residues.
… 16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saro Felix 213-40011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saro Felix 213-40011 in the language / languages: English, German as an attachment in your email.

The manual is 4.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info