596975
59
Zoom out
Zoom in
Previous page
1/102
Next page
User Guide 59
Change Device Name
The device name is the name used to identify
your device in a Bluetooth network.
1. Turn on Bluetooth.
2. On the
Wireless controls
screen, touch
Bluetooth settings > Device name
.
3. Type the name of your device.
4. Touch
OK
.
Pair and Connect to Bluetooth Devices
Before you can connect to other Bluetooth
devices, you must pair the devices first.
1. Turn on Bluetooth.
2. On the
Wireless controls
screen, touch
Bluetooth settings > Scan for devices
.
Your device starts scanning for Bluetooth
devices. All detected devices are displayed
under
Bluetooth devices
.
Note:
Make sure the device that you want
to pair with has Bluetooth turned on and is
discoverable.
3. To start pairing, touch the device name that
you want to pair with.
4. If prompted, enter a passcode to start
pairing. The same passcode must also be
entered on the Bluetooth device.
Note:
For car kits, enter “0000” or “1234”.
If it does not work, consult the Bluetooth
devices documentation.
5. After pairing, touch and hold the paired
device.
6. On the options menu, touch
Options... >
Connect
.
7. The pairing and connection status appears
below the Bluetooth device name. When
Bluetooth hands-free headsets or car kits
are connected to your device, the Bluetooth
connection icon appears on the status bar.
Note:
When a second headset is paired, the
first headset is automatically disconnected.
Once a Bluetooth device has been paired,
the devices will not prompt for passcode
entry again.
Disconnect Bluetooth Devices
1. Touch
Home > Menu > Settings >
Wireless controls > Bluetooth settings
.
2. Under the Bluetooth devices section, touch
and hold the connected device.
3. On the options menu, touch
Disconnect
.
Unpair Bluetooth Devices
1. Touch
Home > Menu > Settings >
Wireless controls > Bluetooth settings
.
2. Under the Bluetooth devices section, touch
and hold the paired device.
3. On the options menu, touch
Unpair
or
Disconnect & unpair
(when connected).
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo Zio M6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo Zio M6000 in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info