288229
65
Zoom out
Zoom in
Previous page
1/66
Next page
EN-65
Symptom
Even if I press the shutter
button, the camera does
not shoot.
Images do not appear on
the LCD monitor.
Although it is set to auto
focus, it does not focus.
The flash does not fire.
The flash cannot recharge.
Even though the flash fired,
the image is dark.
The image is dark.
The image is too bright.
The image lacks natural color.
Cause
The battery is running low.
The power is not on.
The camera is not in shooting mode.
The shutter button is not pressed all
the way down.
The memory card does not have any
free capacity.
End of memory card life.
The flash is charging.
The memory card is unrecognized by
the camera.
The auto power off function is activated.
The memory card is write-protected.
The power is not on.
LCD monitor is dark.
The lens is dirty.
The distance to the subject is smaller
than the effective range.
The flash is set to flash off.
The distance to the subject is greater
than flash effective range.
The image is captured in a dark place
while set to flash off.
It is under-exposed.
It is over-exposed.
The image was captured in
conditions that are hard for auto white
balance to adjust to.
Solution
Recharge the battery.
Turn the power on.
Slide the mode switch to shooting mode.
Press the shutter button all the
way down.
Insert a new memory card, or
delete unwanted files.
Insert a new memory card.
Wait until the status LED off.
Format the memory card in this
camera before its first use or when
it was used other than this camera.
Turn the power on again.
Remove the write-protection.
Turn the power on.
Adjust the brightness of the LCD
monitor in the menu.
Wipe clean with a soft, dry cloth
or lens paper.
Get your subject within the
effective focus range.
Set the flash to something other
than flash off mode.
Get closer to your subject and
shoot.
Set the flash to something other
than flash off mode.
Set the exposure compensation
to a larger value.
Set the exposure compensation
to a smaller value.
Add a white object to the
composition.
Shooting
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo vpc-t700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo vpc-t700 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info