470198
33
Zoom out
Zoom in
Previous page
1/70
Next page
Getting Started 21
Taking your First Photo
English
To set the self-timer/burst mode:
1. Press the RIGHT/SELF-TIMER /BURST MODE navigation button to cycle through
the self-timer( or ) and burst photography options ( or ) on the LCD
screen.
2. Once you have selected an option, frame and take your shot. In self-timer mode, the
icon will flash until the time expires and the photo is taken.
3. After taking a photo, the self-timer automatically exit. If you want to use these functions
for the next photo, press the RIGHT/SELF-TIMER /BURST MODE navigation
button again to activate the function.
Using the AEB (Auto Exposure Bracketing) Function
When using the AEB (Auto Exposure Bracketing) function, the camera auto-matically
takes 3 consecutive photos with different exposures by pressing the SHUTTER button
once. For example, when the current EV compensation value is +1.0 EV and the AEB
bracket interval value is set to ±0.3, the camera takes shots of the same scene with 3
varying levels of exposure: +0.7 EV, +1.0 EV and +1.3 EV.
This function is only available in Auto and P-Mode. To set the AEB mode:
1. Press the MENU button to display menu options.
2. Press the LEFT/RIGHT navigation buttons to select AEB
setting and press the OK button.
3. Press the UP/DOWN navigation buttons to select from the
available options:
Note:
: Burst Mode - Take photos until shutter is released or memory is full.
: Multi-Burst Mode - 16 photos continuously by 1 press of the
SHUTTER button.
AEB: Select to enable (ON) or disable (OFF) the
AEB function.
BRACKET: Select to set the bracket interval value
ranging from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.
EXIT: Select to apply new settings to the camera and return to the setup menu.
Note:
1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.
2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo VPC-E1090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo VPC-E1090 in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info