489453
102
Zoom out
Zoom in
Previous page
1/117
Next page
10
English
3-4-3. Indoor unit types
(SAP-KRV96EHDS, KRV126EHDS)
Basically, these models can be installed and wired
without removing the grille. If access to any internal
part is needed, follow the steps as given below.
How to remove the grille
(1) Open the front panel until it is nearly horizontal,
grasp the sections near the front panel arms on
both sides, and then pull towards you to remove
the front panel. (Fig. 16-2)
(2) Remove the 3 screws from the frame. Also remove
the 2 screws where the screw covers are open.
(Fig. 17-2)
(3) Press the 3 tabs on the top of the grille to
disengage them. (Fig. 17-2)
(4) Pull the grille towards you to remove it. (Fig. 17-2)
How to replace the grille
(1) Insert the bottom of the grille into the flap, with the
flap at a more-or-less horizontal position.
(2) While aligning both edges of the grille with the
frame, move the panel horizontally and insert the
top and bottom into the frame.
(3) Press the air discharge outlet firmly with your hand
to ensure no gap exists between the main unit and
grille.
(4) Tighten the 2 screws and close the screw covers.
Also tighten the 3 screws of the frame.
(5) Grasp the sections near the front panel arms on
both sides, hold the front panel so that it is nearly
horizontal, bring the arm shafts into contact with
the top of the grooves on the right and left sides of
the air conditioner, and then push firmly until the
arm shafts click into place. (Fig. 18-2)
(6) After closing the front panel, press firmly on the
parts indicated by the arrows to securely fasten the
panel in place. (Fig. 19-2)
Check that no gap exists between the main unit and
grille.
NOTE
Fig. 16-2
Fig. 17-2
Front panel
Arm
Screw
Flap
Grille
Screw
Screw cover
Fig. 18-2
Fig. 19-2
Front panel
Pin
Arm
Groove
08-324 CMRV3656EH_IU EN 6/15/09 5:27 PM Page 10
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo SAP-KRV246EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo SAP-KRV246EH in the language / languages: English as an attachment in your email.

The manual is 9,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info