Manual Sanyo SAP-KMRV76EH (page 101 of 117) (English)

489450

101

Zoom out

Zoom in

1/117

English

3-4-2. Indoor unit types

(SAP-KRV184EH, KRV244EH)

Basically, these models can be installed and wired

without removing the grille. If access to any internal

part is needed, follow the steps as given below.

How to remove the grille

(1) Grasp both ends of the air intake grille, and

remove it by opening towards the front and pulling

towards you. (Fig. 16a-1)

(2) Remove the 3 screws. (Fig. 16b-1)

(3) Remove the screw on the right side cover plate

and open the cover. (Fig. 17a-1)

(4) Take out the thermistor from the grille. (Fig. 17b-1)

(5) Press the 3 tabs at the top of the grille and the 3

tabs on the front face to separate the grille from

the frame. (Fig. 18a-1)

(6) Pull the grill towards you to remove it.

How to replace the grille

(1) When installing the grille, place the bottom of the

grille into the frame first. (Fig. 18b-1)

Then insert the tabs on the top of the grille and on

the front face into the frame.

(2) Make sure that the grille and frame are firmly fitted

together by engaging the tabs.

(3) Attach the thermistor on the grille. (Fig. 17a-1)

(4) Close the cover and replace the screw.

(Fig. 17a-1)

(5) Affix the grille with the 3 previously removed

screws. (Fig. 16b-1)

(6) Install the air intake grille.

(a) Allow the edge of the air intake grille to slide

into the top of the indoor unit, and then insert it

all the way inside. (Fig. 19a-1)

(b) Press the bottom right and left corners and

center of the air intake grille to attach it to the

indoor unit. (Fig. 19b-1)

Attach so that the round pins at the top right and left

corners of the air intake grille are inserted into the

grooves at the top right and left of the indoor unit.

NOTE

Air intake grille

Grille

Fig. 16a-1

Fig. 16b-1

Cover

Thermistor

Fig. 17a-1

Thermistor

Fig. 17b-1

Fig. 18a-1

Tab

Fig. 18b-1

Fig. 19b-1

Fig. 19a-1

Groove

08-324 CMRV3656EH_IU EN 6/15/09 5:27 PM Page 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo SAP-KMRV76EH in the language / languages: English as an attachment in your email.

The manual is 9,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo SAP-KMRV76EH Manual

Product: