596978

Sanyo Pro 200 Manual

2
Zoom out
Zoom in
Previous page
1/3
Next page
Charging the Battery
Charge your battery as soon as possible so you can
begin using your phone. Keeping track of your
battery’s charge is important. If your battery level
becomes too low, your phone automatically
turns off, and you will lose any information you
were just working on. For a quick check of your
battery level, glance at the battery charge indicator
located in the upper-right corner of your phone’s
display screen. If the battery charge is getting
too low, the battery icon ( ) appears and the
phone displays awarning message.
Using the Phone Charger
1. Plug the phone charger into an electrical outlet.
2. Open the micro-USB connector cover located
on the lower left side of your phone.
3. Plug the other end of the phone charger into the
micro USB connector.
• A red indicator light means the battery
is charging.
• A green indicator light means the
battery charging is complete.
The battery, can be recharged the before it
becomes completely run down.
Making and Answering Calls
Holding Your Phone
To maximize performance, do not obstruct the
internal antenna area. Also make sure you do not
cover the microphone with your hand while talking.
Making Phone Calls
Placing a normal phone call from your wireless
phone is as easy as making a call from any
landline phone. Enter the number, press TALK,
and you’re on your way to clear calls.
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number from standby mode. (If
you make a mistake while dialing, press BACK to
erase the numbers.)
3. Press TALK.
4. Press END or close the phone when you arenished.
To place a call with the phone closed:
1. Make sure your phone is on and the Side Key
Guard feature is disabled.
2. Press and hold the volume on the right side of
the phone.
3. Follow the system prompts. (The call will be
made in speakerphone mode unless you have a
headset attached to the phone.)
•Say the name of your registered
Voice Dial entry.
You can also place calls from your phone by speed
dialing numbers from your Contacts and using
your History listings.
Answering Phone Calls
To answer an incoming call with the phone open:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press TALK to answer an incoming call.
(Depending on your settings, you may also answer
incoming calls by opening the phone or by pressing
any number key.)
To answer an incoming call with the phone closed:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. When your phone rings or vibrates, press the side
call key (volume) on the right side of the phone.
(The call will be answered in speakerphone mode.)
– or –
Open the phone to use the earpiece.
Your phone noties you of incoming calls in the
following ways:
• The phone rings or vibrates.
• The indicator light ashes.
• The backlight illuminates.
• The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. The caller’s
phone number may also be displayed, if available.
Turning Bluetooth On & Off
By default, your device’s Bluetooth feature is
turned off. Turning Bluetooth on makes your phone
“discoverable”by other in-range Bluetooth devices.
To make your phone visible to other devices you
must also ensure that your phone’s visibility is not
set to Hidden.
• The built-in Calendar offers several personal
information management features to help you
manage your busy lifestyle.
• T9 Text Input lets you quickly type messages with
one keypress per letter.
• Speed dial lets you dial phone numbers with one
keypressor two keypresses.
• The built-in Bluetooth technology allows you to
connect wirelessly to a number of Bluetooth devices to
share information more easily than ever before.
• Your phone allows you to run multiple applications
simultaneously.
Turning Your Phone On and Off
Turning Your Phone On
• Press END
Once your phone is on, it may display “Looking for
service...,” When your phone nds a signal, it
automatically enters standby mode – the phone’s idle
state. At this point, you are ready to begin making and
receiving calls. If your phone is unable to nd a signal
afterve seconds of searching, a Power Save feature is
automatically activated. When a signal is found, your
phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for service by pressing any key
(when your phone is turned on).
Turning Your Phone Off
Press and hold END for two seconds until you
see the powering down animation on the display
screen.Your screen remains blank while your
phone is off (unless the battery is charging).
Battery Capacity
Your phone is equipped with a Lithium Ion
(Li-Ion) battery. It allows you to recharge your
battery before it is fully drained. The battery
provides up to 4.9 hours of continuous digital
talk time. When there are approximately two
minutes of talk time left, the phone sounds an
audible alert and then turns off.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo Pro 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo Pro 200 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info