489698
44
Zoom out
Zoom in
Previous page
1/60
Next page
44
The WARNING indicator shows the state of the function that protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
WARNING
blinking red
TOP CONTROL
Warning Indicator
The projector is shut down and the WARNING indicator is blinking red.
When the temperature inside the projector reaches a certain level,
the projector is automatically shut down to protect its inside. The
POWER indicator is blinking while the projector is being cooled
down. When the projector has cooled down sufficiently (to its
normal operating temperature), it can be turned on again by
pressing the POWER ON/STAND-BY button.
Note:
•TheWARNINGindicatorcontinuestoblinkevenafterthe
temperatureinsidetheprojectorreturnstonormal.Whenthe
projectoristurnedonagain,theWARNINGindicatorstops
blinking.
Then check the items below.
Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation
slots are not blocked.
Has the projector been installed near an Air-Conditioning/Heating
Duct or Vent? Move the installation of the projector away from
the duct or vent.
Is the air filter clean? Clean the air filter periodically or replace it
with a new one.
TOP CONTROL
The projector is shut down and the WARNING indicator lights red.
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside of the projector
and the WARNING indicator lights red. In this case, unplug the
AC power cord and plug it, and then turn on the projector once
again to verify operation. If the projector cannot be turned on and
the WARNING indicator lights red, unplug the AC power cord and
contact the service station.
CAUTION
DO NOT LEAVE PROJECTOR WITH AC POWER CORD
CONNECTED UNDER AN ABNORMAL CONDITION. IT
MAY RESULT IN FIRE OR ELECTRIC SHOCK.
WARNING
lights red.
Maintenance and Cleaning
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLV-Z700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLV-Z700 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLV-Z700

Sanyo PLV-Z700 User Manual - German - 60 pages

Sanyo PLV-Z700 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info