489694
81
Zoom out
Zoom in
Previous page
1/92
Next page
The projector is detecting abnormal condition.
Indicators
Projector Condition
POWER
green
LAMP
red
WARNING
TEMP.
red
WARNING
FILTER
orange
SHUTTER
blue
LAMP
REPLACE
orange
If the Filter counter reaches a time set in the timer
setting, a Filter replacement icon (Fig.2) will appear
on the screen and the WARNING FILTER indicator
on the top panel will light up. Replace the filter as
soon as possible. If the filter is out of scroll and the
projector reaches a time set in the timer setting,
Fig. 3 will appear on the screen and the WARNING
FILTER indicator will light up. Replace the filter
cartridge as soon as possible.
If the filter is clogged and no scroll is left in the
filter cartridge, a Filter cartridge replacement icon
(Fig.4) will appear on the screen and the WARNING
FILTER indicator will light up. Replace the filter
cartridge as soon as possible.
Note:
Fig.2,Fig.3andFig.4iconwillnotappearwhen
theDisplayfunctionissettoOff(p.52)orduring
“Freeze”(p.30).
The filter cartridge is not installed in the projector.
Check the filter compartment to see if the filter
cartridge is installed in the projector. When the filter
cartridge is installed and the indicators continue to
light and blink, read the column below.
The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord and
plug it again to turn on the projector. If the projector
is turned off again, unplug the AC power cord and
contact the dealer or the service center. Do not
leave the projector on. It may cause an electric
shock or a fire hazard.
The shutter is out of control.
The shutter is out of control. (The projector is in the
cooling mode.)
The shutter is out of control. (The projector is in the
stand-by mode.) In that case, contact the service
center immediately.
Fig.2 Filter replacement icon
Fig.4 Filter cartridge replacement icon
Fig.3
Appendix
81
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-ZM5000L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-ZM5000L in the language / languages: English as an attachment in your email.

The manual is 13,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info