489694
6
Zoom out
Zoom in
Previous page
1/92
Next page
Openings in the cabinet are provided for
ventilation. To ensure reliable operation of the
product and to protect it from overheating, these
openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
Do not put any flammable object or spray can
near the projector, as hot air is exhausted from
the air vents.
Keep the exhaust vent at least 3' (1 m) away
from any objects.
Do not touch peripheral parts of the exhaust
vent, especially screws and metallic parts.
These areas will become hot while the projector
is being used.
Do not put anything on the cabinet. Objects put
on the cabinet will not only get damaged but
also may cause fire hazard by heat.
Cooling fans are provided to cool down the
projector. The fans’ running speed is changed
according to the temperature inside the projector.
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air flow
The projector uses a lamp which generates
significant heat. The cooling fans and air vents are
provided to dissipate the heat by drawing air into
the housing and the filter is located in the intake
vents to prevent dust from getting inside of the
projector.
In order to care for the projector appropriately,
regular cleaning is required. Remove any dirt or
dust that has accumulated on the projector.
If the projector reaches a time set in the timer
setting, a Filter replacement icon (Fig. 1) appears
on the screen and WARNING FILTER indicator on
the top panel lights up (see below), indicating that
the filter replacement is necessary.
If the projector detects that the filter is clogged
and no scroll is left in the filter cartridge, a Filter
cartridge replacement icon (Fig. 2) appears on the
screen and WARNING FILTER indicator on the top
panel lights up (see below). Stop using the projector
immediately and replace the filter cartridge.
Blocking the air vents and leaving the projector
uncleaned for a long time may not only damage the
projector and may require costly repairs but may
also cause accidents or fire.
For maintenance of the filter, refer to “Filter counter”
on page 65 and “Maintenance and Care” on pages
66-68.
Damages to the projector caused by using an
uncleaned filter or improper maintenance will
void the warranty on the projector.
IMPORTANT!
Filter Maintenance!!
Top Panel
WARNING
FILTER
indicator
Fig. 1 Filter replacement icon
Fig. 2 Filter cartridge
replacement icon
Safety Instructions
Air Circulation
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-ZM5000L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-ZM5000L in the language / languages: English as an attachment in your email.

The manual is 13,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info