543832
65
Zoom out
Zoom in
Previous page
1/79
Next page
65
No image – Check the connection between your computer or video equipment
and the projector. See pages 14-16.
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output
when connecting to a projector. See your computer’s instruction
manual for the setting.
– It takes about 30 seconds to display an image after turning on the
projector. See page 18.
Check the Input signal, color system, video system or computer
system mode.
– Make sure the temperature is not out of the specified Operating
Temperature (41˚F–95˚F [5˚C–35˚C]).
– When No Show is operating, the image cannot be displayed. Press
the NO SHOW button or any other button on the remote control.
No sound – Check the audio cable connection from audio input source.
– Adjust the audio source.
– Press the Volume + button. See page 24.
– Press the Mute button. See page 24.
– When the AUDIO OUT is plugged-in, the projector's built-in speaker
is not available.
– Is the image projected? You will hear the sound only when the image
is projected.
The color is strange. – Check the Input signal, color system,video system or computer
system mode.
– Make sure the Blackboard is not selected on Image select
menu.See pages 33,40.
Some displays are not seen – Check the Display function. See page 46.
during the operation.
Auto PC adjustment function – Check the Input signal. Auto PC function can not work when
does not work. 480p,575p.720p,480i,575i,1035i or 1080i is selected .See Page 30.
The icon is not available in grayout when the digital signal is input.
The setting does not remain – Make sure you selected Store after adjusting setting. Some settings
after turning off power. can not be stored if not registered with "Store".See pages 35,42.
Power management does not – Power management function can not work while Freeze or No
work. Show function is running.See page 51.
Capture function does not work. – Check the connection and the input signal to see if there is signal.
Auto setup does not work properly.
Make sure Off is not selected at any function of Auto setup.See page
45.
– Make sure On is not selected at the Ceiling function.See page 50.
Auto keystone function does not – Make sure the Auto keystone function is not set to
Manual. Press
work even when the projector is the AUTO SETUP button on the top control.See pages 23,45.
tipped.
Appendix
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-XU350K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-XU350K in the language / languages: English as an attachment in your email.

The manual is 18,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info