Manual Sanyo plc xu100 (page 20 of 66) (English)

214627

Zoom out

Zoom in

1/66

The message will disappear after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT OFF.

Tu r ning Off the Projector

Press the ON/STAND-BY button on the top control or on

the remote control, and “Power off?” appears on the

screen.

Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red, and

the cooling fans keep running. (You can select the level

of fans’ quietness and speed. See "Fan" on page 49.)

At this time, you can unplug the AC power cord even if

the fans are still running.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector. After it is cooled down completely,

unplug the AC power cord.

✔Notes:

•When the On start function is set to “On,” the projector will be

turned on automatically by connecting the AC power cord to an AC

outlet (p.46).

•Do not operate the projector continuously without rest. Continuous

use may result in shortening the lamp life. Turn off the projector

and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the

temperature inside the projector.

•Do not put the projector in a case before the projector is cooled

enough.

•If the WARNING indicator blinks or lights red, see “Warning

Indicators” on page 51.

•While the POWER indicator is blinking, the lamp is being cooled

down and the projector cannot be turned on. Wait until the

POWER indicator stops blinking to turn on the projector again.

Basic Operation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xu100 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo plc xu100 Manual

Product: