Manual Sanyo plc xt21l (page 56 of 83) (English)

215620

Zoom out

Zoom in

1/83

Setting

This function prevents an unauthorized person from

changing the screen logo.

Off............ The screen logo can be changed freely from

the Logo Menu (p.55).

On ............ The screen logo cannot be changed without

a Logo PIN code.

If you want to change the Logo PIN code lock setting,

press the SELECT button and the Logo PIN code dialog

box appears. Enter a Logo PIN code by following the

steps below. The initial Logo PIN code is set to “4321”

at the factory.

Logo PIN code lock

Enter a Logo PIN code

Use the Point ed buttons or Number buttons on the

remote control to enter a number. Press the Point 8

button to fix the number and move the red frame pointer

to the next box. The number changes to “✳.” If you fixed

an incorrect number, use the Point 7 button to move the

pointer to the number you want to correct, and then enter

the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to

“Set.” Press the SELECT button so that you can start to

operate the projector.

If you entered an incorrect Logo PIN code, “Logo PIN

code” and the number (✳✳✳✳) will turn red for a moment.

Enter the correct Logo PIN code all over again.

After a correct Logo PIN code

is entered, the following

dialog box appears.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit

number. Press the Point d button to select “Logo PIN

code change” and then press the SELECT button. The

New Logo PIN code input dialog box appears. Set a new

Logo PIN code.

Be sure to note the new Logo PIN code and keep it at

hand. If you lost the number, you could no longer change

the Logo PIN code setting. For details on PIN code

setting, refer to “PIN code lock” on pages 60–61.

CAUTION:

WHEN YOU HAVE CHANGED THE LOGO

PIN CODE, WRITE DOWN THE NEW PIN

CODE IN COLUMN OF THE LOGO PIN

CODE NO. MEMO ON PAGE 81, AND

KEEP IT SECURELY. SHOULD THE LOGO

PIN CODE BE LOST OR FORGOTTEN, THE

LOGO PIN CODE SETTING CAN NO

LONGER BE CHANGED.

Logo PIN code lock

Use the Point 7 8 button to switch On/Off, and then

press the Point d button to move the pointer to “Quit.”

Press the SELECT button to close the dialog box.

Change the Logo PIN code lock setting

Change the Logo PIN code

Use the Point 7 8 buttons to

switch On/Off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xt21l in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo plc xt21l Manual

Product: