Manual Sanyo plc xt21 (page 62 of 83) (English)

215621

Zoom out

Zoom in

1/83

Setting

Factory default

This function returns all setting values except for the user

logo, PIN code lock, Logo PIN code lock, lamp counter, and

filter counter to the factory default settings.

Exit the Setting Menu.

Quit

Select Factory default and this

box appears. Select [Yes], and

the next box appears.

Select [Yes] to

activate it.

Factory default

This function is used to set a frequency for the filter cleaning.

When the projector reached a specified time between

cleanings, a Filter warning icon (yellow) appears on the

screen and the WARNING FILTER indicator lights orange,

notifying the cleaning is necessary. After cleaning the filter,

be sure to select RESET and set the timer. The WARNING

FILTER indicator and Filter warning icon will not turn off until

the filter counter is reset.

For details about resetting the timer, refer to “Resetting the

Filter Counter” on page 64.

Filter counter

Use the Point 7 8 buttons to set

the timer. Select from (Off/100H/

200H/300H) depending on the

use environment.

Filter warning icon (yellow) appears on the screen

at a set time.

✔Note:

•The Filter warning icon (yellow) will not appear

when the Display function is set to “Off” (p.57),

during “Freeze” (p.31), or “No show” (p.32).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xt21 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo plc xt21 Manual

Product: