Manual Sanyo plc xt21 (page 12 of 83) (English)

215621

Zoom out

Zoom in

1/83

Part Names and Functions

!0 R/C JACK

When using the wired remote control, connect the

wired remote control to this jack with a remote

control cable (not supplied).

!2 MONITOR OUTPUT TERMINAL (ANALOG)

This terminal outputs the video signal from

computer to external video equipment (pp.22, 24).

✽ RESET button

A built-in micro processor which controls this unit may

occasionally malfunction and need to be reset. This can be

done by pressing the RESET button with a pen, which will

shut down and restart the unit. Do not use the RESET

function excessively.

Rear Terminal

!0!1!2!3!4

✽

!1 AUDIO MONITOR OUTPUT JACK (VARIABLE)

This jack outputs the audio signal from computer

or video equipment to external audio equipment

(pp.22–24).

!3 CONTROL PORT CONNECTOR

When controlling the projector from a computer,

connect the computer to this connector with a

control cable.

!4 INFRARED REMOTE RECEIVER (Back)

The infrared remote receiver is also located in the

front (pp.10, 18).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xt21 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo plc xt21 Manual

Product: