215777
56
Zoom out
Zoom in
Previous page
1/77
Next page
56
How to Use the Antitheft Alarm Function
Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to
On,” the alarm rings as an unauthorized person tries to move the projector.
To activate the Alarm function for the first time after purchase, you must turn on the power once.
Press the F button three times to turn the alarm function
on. The ALARM indicator blinks for a few seconds and the
projector enters the warning mode. (If the battery is not
charged enough for the alarm function to operate normally,
it bleeps and the Alarm indicator will blink red every 20
seconds.)
During the Antitheft alarm function is on, the projector
emits a low-pitched sound when it detects vibration.
When the projector does not detect vibration for a few
seconds after the sound, it goes back to the warning mode.
When the projector detects more vibrations after the low-
pitched sound, the alarm starts ringing.
The Alarm operating configuration (Alarm volume,
Sensitivity, and Ringing time) can be selected in the menu.
See page 57.
Set the alarm
Release the alarm setting
Note:
•This function is not a guarantee against stealing.
The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects
vibrations.
•The alarm will stop, as the AC power cord is connected to an outlet, except when the battery cover is open.
Pressing the buttons is always accompanied by a sound. If no sound is produced after pressing a button,
you need to press it again.
Set and release the Antitheft alarm function
Note:
You can test the alarm sound without setting the alarm
function. Press and hold the F button, then the alarm
starts ringing. The duration of the alarm sound is the
same as the “Ringing Time” setting (p.57).
If you want to stop the alarm while it is ringing, insert
the AC power cord to an outlet or press the F button and
enter the four-digit PIN code number.
The Alarm function is operated by a built-in rechargeable
battery. The alarm will not work properly if the battery is not
charged enough. See page 58 for details.
Press the F button and enter the four-digit PIN code number
within about 10 seconds. (The default PIN code is set to
“1111.”) When the alarm is released, you will hear a high-
pitched confirmation sound.
When you enter an incorrect PIN code, you will hear a low-
pitched sound. If you enter an incorrect PIN code three
times in a row, the alarm will start ringing.
The Alarm setting and release and PIN Code change can be
made without an AC power connection.
Antitheft Alarm Function
Indicator
ALARM indicator
Terminal
F button
Button 1, 2, 3
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo plc xl51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xl51 in the language / languages: English as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info